The AirTAC GC600C20MC2K AirTAC F.R.L. Combination, PT3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C20MC2K is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one 3-piece set, giving filtration (water and particulate removal), pressure regulation and oil-mist lubrication in a single supply point. This size 600 configuration is ported PT3/4 with PT (standard) thread, uses the 40 um standard filter element, and has a manual drain on the filter bowl. The regulator is the standard type with a 0.05-0.9 MPa (7-130 psi) adjustment range, and this code carries a round external gauge with a psi scale (the embedded square gauge is the standard fitting, with MPa/psi/bar scale choices available). A reverse/check valve (code K) is fitted, and the mounting bracket is included. At size 600 the bowls are aluminium alloy.
This is a genuine AirTAC part. The GC line spans sizes 200, 300, 400 and 600, with port options from 1/8 to 1 inch, G (BSPP) and NPT thread options to order, a choice of differential-pressure, automatic or manual drains, a 5 um (code W) filter grade option, gauge scale choices, and an optional reverse/check valve. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for this exact model on request.
| Model | GC600C20MC2K AirTAC F.R.L. Combination, PT3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding spray booths and air-assisted guns on a vehicle paint line, where the filter removes water and pipe scale, the regulator holds a steady set pressure, and the lubricator mists oil to the gun trigger and air motor.
Supplying the pneumatic pushers, stoppers and lift cylinders along a bottling or canning conveyor, where stable regulated pressure keeps indexing consistent and lubrication extends cylinder seal life.
Powering the pneumatic clamps, tool-change actuators and air blow-off on a machining centre, where the three-unit set protects valves from particulates, holds clamp pressure and oils the actuators.
Start with the port and size step: size 600 with a 3/4 inch PT port suits the larger end of the range, but always step the size against the air consumption of the machines on the line rather than the pipe thread alone. Choose the drain type deliberately: this unit has a manual drain, which means an operator drains the bowl on a routine; if the installation is unattended or hard to reach, an automatic or differential-pressure drain variant is the better decode. The 40 um element is the standard grade for general plant air; specify the 5 um (W) option only where downstream equipment needs finer filtration.
For the gauge, this code is fitted with a round external gauge on a psi scale; square embedded gauges and MPa or bar scales are the other catalogue choices. Thread is PT as standard, with G (BSPP) and NPT available as order options - state them as a specification, not a delivery promise. A reverse/check valve is fitted on this unit, and the bracket is included. Because flow is published as curves and not a single rating, send us your application's air demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so we do not quote a number such as l/min or SCFM. Send us your application's air demand and working pressure, and we will confirm the correct sizing from the datasheet on request.
The M in the code GC600C20MC2K specifies a manual drain: an operator opens the drain on the filter bowl to expel collected water. The GC family is also available with automatic or differential-pressure drains, so if the installation is unattended, ask us for the equivalent model with the drain type you need.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.