The AirTAC GC600C20MC2WK AirTAC F.R.L. Combination, PT3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C20MC2WK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one prepared-air station. This 600-size unit carries a 3/4 in PT port, a 5 um filter element (the finer of the two catalogue grades), a manual drain on the filter bowl, an external round gauge reading in psi, a reverse/check valve on the regulator, and a mounting bracket. At size 600 the filter and lubricator bowls are aluminium alloy, suited to demanding installations.
This is a genuine AirTAC part. The GC line spans sizes 200 to 600 with port sizes from 1/8 in to 1 in, and options including automatic, manual or differential-pressure drains, 40 um or 5 um filtration, gauge style and scale, and G or NPT threads as order variants. Rated flow is published as curves rather than a single figure, so we confirm the datasheet numbers for your application on request.
| Model | GC600C20MC2WK AirTAC F.R.L. Combination, PT3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and lubricated air for spray guns and air-assisted equipment at a paint line, where the 5 um element and oil misting support consistent finish work.
Powers pneumatic cylinders and actuators on carton-forming and sealing conveyors, with the check valve holding circuit pressure during supply dips.
Supplies workholding clamps and air vices on CNC cells, where a stable regulated pressure and lubricated air keep clamping action repeatable.
Step up through the GC sizes (200/300/400/600) as port size and air demand grow; this unit sits at the top of the range with a 3/4 in PT port. Drain choice matters: manual drain needs an operator to bleed the bowl, while automatic and differential-pressure drains discharge condensate on their own - this configuration is manual. The 5 um element (code W) suits finer air-quality needs than the standard 40 um. Gauge options are the embedded square type or an external round gauge, in MPa, psi or bar scales - here it is a round psi gauge. A reverse/check valve (code K) holds downstream pressure if supply is interrupted. Thread is PT as standard, with G and NPT available to order.
Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote one number. Tell us your application and we will confirm the relevant flow data from the datasheet on request.
Manual drain means an operator opens the drain on the filter bowl to remove collected condensate; automatic and differential-pressure drains are catalogue alternatives if you prefer unattended operation. The W is the filter-grade code: a 5 um element instead of the standard 40 um.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.