The AirTAC GC600C20MF2GK AirTAC F.R.L. Combination, G3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C20MF2GK is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. This 600-size unit is built for G3/4 ports and carries a 40 um filter element with a manual drain on the aluminium alloy bowl, a standard regulator adjustable from 0.05 to 0.9 MPa (7-130 psi) with an embedded square gauge scaled in psi, and an oil-mist lubricator. A reverse/check valve is fitted and a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi); operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC series is also available in 200, 300 and 400 sizes, with a choice of port and thread (PT standard; G and NPT as order options), drain type (differential-pressure, automatic or manual), 5 um filtration (code W), gauge scale, and a low-pressure regulator type. Rated flow is published as curves rather than a single figure, so we confirm flow and datasheet details on request before you order.
| Model | GC600C20MF2GK AirTAC F.R.L. Combination, G3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Placed at the head of the air drop feeding spray booths and air-assisted applicators, this unit cleans water and particulate from the supply, holds a steady set pressure for consistent atomisation, and carries oil mist downstream to keep air motors and actuators on the line running smoothly.
Mounted on the supply to a packaging line's pneumatic cylinders, clamps and flap-folders, this combination removes condensate and debris, keeps the regulated pressure stable as multiple stations cycle, and lubricates the cylinder seals and valves that see continuous daily duty.
Installed ahead of a CNC machine tool's clamping, tool-change and chip-clearing circuits, this unit delivers filtered, regulated and lubricated air so workholding and tool-change actuators receive clean, stable pressure, with the fitted check valve holding the circuit against backflow.
The real choices in this series are the size and port step (200, 300, 400, 600 - larger sizes carry larger ports and more flow), the drain type on the filter bowl (differential-pressure as standard, automatic, or manual as fitted here), the filter grade (40 um standard, 5 um with code W), the gauge (embedded square as standard, external round optional, scaled in MPa, psi or bar), the thread (PT standard, G or NPT to order), and the reverse/check valve. This 600-size configuration gives you G3/4 ports, manual drain, 40 um filtration, a psi-scaled square gauge and a fitted check valve.
Because rated flow is published as curves rather than a single number, size the unit against your actual air demand with us first: send the application details and we will confirm the flow and datasheet figures for the GC600 before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure and air demand and we will confirm the flow and datasheet figures for this 600-size, G3/4 unit on request.
The M in GC600C20MF2GK specifies a manual drain on the filter bowl: condensate is released by hand, which suits installations checked as part of a routine. The GC series is also ordered with a differential-pressure drain (the standard) or an automatic drain - tell us which you need and we will confirm the matching code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.