The AirTAC GC600C20MF2W AirTAC F.R.L. Combination, PT3/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C20MF2W is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one filtered-air supply point. This configuration is built on the largest size in the range, with a 3/4 in PT port, 5 um filtration (the finer of the two published grades), a manual drain on the filter bowl, and a fitted embedded square gauge reading in psi. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and the maximum working (inlet) pressure is 1.0 MPa (145 psi). Operating temperature is -5 to 70 C, non-freezing. At size 600 the bowls are aluminium alloy.
This is a genuine AirTAC part sold by a distributor for the US market. The GC family is published in sizes 200, 300, 400 and 600, with port options, thread choices (PT standard, G and NPT as order options), drain types (differential-pressure, automatic or manual), filter grades (40 um standard, 5 um optional) and gauge scales available across the range. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC600C20MF2W AirTAC F.R.L. Combination, PT3/4, 5 um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
A paint line needs air that is dry of bulk water, free of fine particulate, held at a stable set pressure, and lightly oiled for the spray guns and air motors downstream. A three-unit F.R.L. at the point of use delivers all three jobs in one assembly, with the 5 um grade protecting finish quality.
Carton sealers, case erectors and palletiser grippers run continuously on shop air. A combination unit at the line drop conditions the supply once for the whole conveyor section, with the square psi gauge letting operators verify the set pressure at a glance during changeover.
A machining centre's pneumatic tool changer, clamps and coolant-air blasts depend on clean, regulated, lubricated air. A 3/4 in combination unit sized for the machine's air demand conditions the supply at the machine inlet, with the manual drain emptied as part of daily checks.
Start with the port step: size 600 with a 3/4 in PT port is the largest G-series offering, so size up from 300/400 only where your line's air demand genuinely calls for it - and let us check the published flow curves against your consumption before you commit. Choose the drain to match the installation: manual drain (as fitted here) suits positions an operator visits routinely; automatic or differential-pressure drain suits less accessible points. Choose 5 um filtration where downstream valves, cylinders or instruments need finer protection than the 40 um standard grade. The gauge here is the embedded square type reading in psi; MPa and bar scales and an external round gauge are alternatives. Thread is PT as standard - order G (BSPP) or NPT explicitly if your pipework needs them. A mounting bracket is included with this unit.
One honest note on sizing: AirTAC publishes flow for this series as curves, not as a single rated number, so we do not quote a flow figure here. Send us your application details and we will confirm the datasheet flow data against your requirement before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the G-series as performance curves rather than a single rated figure, so we do not state one number here. Tell us your application and air consumption and we will confirm the datasheet flow data for this 3/4 in, size-600 unit against your requirement on request.
The M in the code specifies a manual drain on the filter bowl: an operator opens it to release collected water and contaminants. It suits points visited routinely. If the unit will sit in a less accessible position, order the automatic (A) or differential-pressure (blank) drain variant instead - both are published options in the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.