The AirTAC GC600C20MF2WK AirTAC F.R.L. Combination, PT3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C20MF2WK is a three-piece AirTAC G-series F.R.L. combination: a separate filter, regulator and lubricator assembled into one air-preparation station. At this 600 size it is ported PT3/4 (3/4 in, PT thread as standard; G and NPT are order options). The filter stage carries the 5 um element (code W) with a manual drain, and the 600-size bowls are aluminium alloy. The regulator is the standard type with a 0.05-0.9 MPa (7-130 psi) adjustment range, an embedded square gauge reading in psi, and a reverse/check valve fitted; a mounting bracket is included. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC combination is offered in 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, and with choices of drain type, 40 um or 5 um filtration, gauge type and scale, thread, and check valve. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC600C20MF2WK AirTAC F.R.L. Combination, PT3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns and air-driven agitators in a finishing booth: the 5 um element and lubricator deliver clean, oil-misted air at the pressure set on the psi gauge, with the check valve holding the setting against backflow.
Conditioning the shop-air feed to clamps, air tools and blow-off nozzles on a machining centre: filtered, regulated and lubricated air in one station at a 3/4 in PT connection.
Supplying pneumatic cylinders and actuators on a carton-forming and sealing conveyor, where the regulator holds a stable setpoint and the lubricator mists the air to extend seal and cylinder life.
Size the unit by the port and flow step: 200, 300, 400 and 600 cover 1/8 in through 1 in ports, and stepping up a size gives a larger port and more flow capacity; this configuration is fixed at 600 / PT3/4. The M in the code means the bowls are drained manually, so someone must open the drain on a routine; the A (automatic) and blank (differential-pressure) drain codes suit unattended installations. Filtration here is the 5 um element (W) where 40 um is the standard grade. The gauge is the embedded square type reading psi, with MPa and bar scales and an external round gauge as alternatives. Thread is PT as standard; G (BSPP) and NPT are order options, and a bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
Flow for the GC600 series is published as curves in the AirTAC catalogue, not as a single rated number, so we do not quote a figure here. Send us your application details and we will confirm the datasheet flow data and check the sizing against your demand before you order.
The M in the code means the bowls are drained by hand: open the drain on a routine to remove collected water and contaminants. If the unit will sit where routine draining is impractical, the A (automatic) and blank (differential-pressure) drain codes are the alternatives to discuss with us.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.