The AirTAC GC600C20MLC2WGK AirTAC F.R.L. Combination, G3/4 Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC600C20MLC2WGK is a three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator piped as one treatment stack. This configuration is built around a G3/4 (3/4 in) port, a 5 um filter element (the finer of the two published grades), a manual drain on the filter bowl, and a low-pressure type regulator, so it suits lines that run below standard shop-air settings. The regulator is fitted with an external round gauge reading in psi, and a reverse/check valve is included to hold downstream settings if the supply drops. At size 600 the bowls are aluminium alloy, and the unit comes with a mounting bracket.
This is a genuine AirTAC part from the GC600 series, the largest size in the G-series air-treatment range, which steps down through 200, 300 and 400 with smaller ports. Across the series you can order different drain types, a 40 um or 5 um filter grade, gauge scales in MPa, psi or bar, and PT, G or NPT threads. Flow figures for this unit are published as curves rather than a single rating, so ask us and we will confirm the datasheet numbers for your application on request.
| Model | GC600C20MLC2WGK AirTAC F.R.L. Combination, G3/4 Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding spray-booth and paint-line air drops where the 5 um element polishes water and particulate out of the supply, the lubricator mists oil to downstream air tools, and the low-pressure regulator holds the gentler settings finishing work needs.
Supplying the valve-and-cylinder circuits on carton-forming and case-sealing conveyors, with the round psi gauge giving operators a direct readout, the check valve protecting settings during supply dips, and the manual drain serviced at shift checks.
Treating the air feeding clamps and fixtures on CNC machining cells, where filtered, regulated and lubricated air keeps actuation consistent through a full shift and the aluminium-bowl size 600 stack handles the higher demand of a multi-station cell.
Size 600 with a G3/4 port is the right step when your line's required flow sits above what 1/2 in and smaller units carry; match the port to your existing pipework rather than upsizing blindly. Because flow is published as curves, not a single rated figure, send us your air demand and we will confirm sizing against the datasheet before you order. This unit already carries the 5 um (W) element; if your application only needs general water and particulate removal, the 40 um standard grade is the alternative. The manual drain here means someone opens the bowl drain during checks; if the unit is mounted where routine access is awkward, an automatic or differential-pressure drain version is the better choice. Note this is the low-pressure regulator type, so if your line runs at standard settings, confirm the type with us. Thread options are PT (standard), G and NPT; this unit is G. A bracket is included, and the gauge can be ordered in MPa, psi or bar scale.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for this series as performance curves rather than a single rated figure, so we do not quote one number. Tell us your line's air demand and operating pressure and we will confirm the datasheet flow figures for this exact unit on request before you order.
The M in the code sets a manual drain: condensate collected in the filter bowl is released by hand during maintenance checks. If the unit will be mounted where regular access is difficult, the same GC600 size can be ordered with an automatic or differential-pressure drain instead - just ask and we will confirm the variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.