The AirTAC GC600C25AC2 AirTAC F.R.L. Combination, PT1 in is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC600C25AC2 is a three-piece F.R.L. combination that conditions compressed air in one assembly: a filter removes water and particulate, a regulator holds a set downstream pressure, and a lubricator feeds an oil mist to downstream pneumatic tools and actuators. This size 600 unit is fitted with a PT1 in (1 inch) port, a 40 um standard filter element, an automatic drain on the filter bowl, and an external round gauge reading in psi. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi). At size 600 the filter bowl is aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and with options including differential-pressure, automatic or manual drains, a 5 um (W) filter element, gauge scale in MPa, psi or bar, G (BSPP) or NPT threads, and a reverse/check valve. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC600C25AC2 AirTAC F.R.L. Combination, PT1 in |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to impact wrenches and nutrunners on a vehicle assembly line, where the automatic drain handles condensate on a 1 in main drop.
Supplies clean, pressure-regulated and lubricated air to hydraulic-pneumatic clamp circuits on CNC machining centres, with the psi gauge giving operators a local setpoint readout.
Conditions the air feeding tape-head and flap-fold cylinders on a carton sealing conveyor, keeping seals moisture-free and cylinders lubricated across a full shift.
Start with the port and size step against the air demand of the circuit: size 600 with a PT1 in port is the largest step in the GC range, and the right choice depends on the flow your line needs - because flow is published as curves and not as a single rating, ask us to confirm sizing against your application before ordering. Choose the drain type: this unit has an automatic drain, which discharges condensate without attention; manual and differential-pressure drains are also available in the series. The standard filter grade is 40 um; specify the W option for 5 um where finer filtration is required. The gauge on this unit is an external round gauge reading in psi; embedded square gauges and MPa or bar scales are the other catalogue choices. Thread is PT as standard, with G (BSPP) and NPT available as order options, and a mounting bracket is included.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated number, so we do not quote a flow figure here. Tell us your operating pressure and the air demand of your circuit, and we will confirm the correct size and the datasheet flow figures on request before you order.
A GC combination is a separate filter, regulator and lubricator in one assembly, so each element can be serviced or replaced on its own; a GFC is a two-piece set with the filter and regulator in a single body plus a separate lubricator. This GC600C25AC2 carries an automatic drain, a 40 um element and a round psi gauge; drains, filter grade, gauge scale and thread (PT standard, G or NPT to order) are the choices you can specify.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.