The AirTAC GC600C25AC2GK AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC600C25AC2GK is a three-piece F.R.L. combination that filters, regulates and lubricates compressed air in one assembly: a separate filter unit, a pressure regulator and an oil-mist lubricator. This size-600 configuration is built around a G1 (1 in) port with G thread, carries a 40 um filter element and an automatic drain on the bowl, and includes a reverse/check valve on the regulator. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and the fitted round gauge reads in psi. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). At size 600 the bowls are aluminium alloy.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with a choice of ports, thread options (PT standard; G and NPT as order options), drain types (differential-pressure, automatic or manual), a 5 um filter element (code W), gauge scale options (MPa, psi or bar) and an optional reverse/check valve. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GC600C25AC2GK AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding tool stations and actuator drops off a 1 in plant air main, where filtered, regulated and lubricated air keeps impact wrenches and clamps working consistently through a full shift.
Supplying the pneumatic cylinders that stop, divert and index bottles, with the automatic drain handling condensate so the line keeps running without daily bowl attention.
Conditioning air for heavy clamps and cutting heads in a metal-processing cell, where the check valve holds the set downstream pressure and the lubricator feeds the actuator seals.
Start with the port and size: this unit is size 600 with a G1 (1 in) port, the largest step in the GC range, so step down to GC200/GC300/GC400 if your line uses smaller ports and lower air demand. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering. The drain here is automatic, which suits unattended installations; manual and differential-pressure drains are the alternatives in the range. The 40 um element is the standard grade; specify code W for 5 um where finer particulate removal is needed. The fitted round gauge reads in psi; square embedded gauges and MPa or bar scales are the other gauge choices. Thread is G on this code, with PT standard and G/NPT available as order options, and a bracket is included.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a rated flow, Cv or SCFM figure. Tell us your application and operating pressure and we will confirm the flow and sizing figures from the datasheet on request before you order.
The A in the code sets an automatic drain on the filter bowl, so collected condensate is expelled without manual intervention - useful where the unit is mounted in a less accessible position. C2 sets the optional external round gauge with a psi scale; the embedded square gauge is standard and MPa or bar scales are available if you prefer.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.