The AirTAC GC600C25AF2G AirTAC F.R.L. Combination, G1 (1 in) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25AF2G is an AirTAC GC600 three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioning set for compressed air. This configuration is built for 1 in lines with G (BSPP) ports, an automatic drain on the filter bowl, a 40 um filter element, and a standard regulator adjustable from 0.15-0.9 MPa (20-130 psi). An embedded square gauge reading in psi is fitted, and an external round gauge is available as an option. Maximum inlet pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), and the size 600 bowls are aluminium alloy. A mounting bracket is included; no reverse/check valve is fitted.
This is a genuine AirTAC part from the GC series, which spans sizes 200, 300, 400 and 600 with ports from 1/8 in up to 1 in. Across the range you can order manual or differential-pressure drains, a 5 um filter element (code W), gauge scales in MPa, psi or bar, and PT, G or NPT threads. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GC600C25AF2G AirTAC F.R.L. Combination, G1 (1 in) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Point-of-use conditioning on a 1 in ring main feeding impact drivers and clamp cylinders: the filter strips water and swarf, the regulator holds set pressure, and the lubricator mists oil for the air tools.
A case-palletising cell running gripper cylinders and clamp actuators around the clock, where automatic drainage keeps condensate out of the valves and the regulator pins the working pressure.
Heavy-duty truck service bays fed by a 1 in drop: filtered, regulated and lubricated air for impact wrench and air-rauchet stations so the tools get clean, wetted air at a stable setting.
Choose the size by port and demand: size 600 with 1 in ports sits at the top of the GC range for high-consumption lines. On this model the drain is automatic, so condensate is expelled without manual attention; manual and differential-pressure drains are the other catalogue choices. The 40 um element is standard; specify code W for 5 um filtration. The fitted square gauge reads in psi, with MPa or bar scales available, plus an optional external round gauge. Thread on this unit is G (BSPP); PT is the standard thread and NPT is an order option. Flow for the GC series is published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and air demand and we will confirm the flow from the datasheet for this exact size 600, 1 in unit on request.
This unit's filter carries an automatic drain, which expels collected condensate without anyone opening the bowl - useful on lines that run unattended. The catalogue also offers manual and differential-pressure drains on GC combinations, so you can order the drain type that suits your maintenance routine.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.