The AirTAC GC600C25AF2K AirTAC F.R.L. Combination, PT 1 in is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator built up as one conditioned-air supply unit. This GC600C25AF2K is the size 600 configuration with a 1 in PT port, automatic drain on the filter bowl, standard 40 um filtration, an embedded square gauge reading in psi, a reverse/check valve fitted, and a mounting bracket included. The aluminium alloy bowl is used at size 600, the largest frame in the range. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
It is a genuine AirTAC part, available in sizes 200 to 600 with ports from 1/8 in to 1 in, PT thread as standard and G or NPT as order options, a choice of automatic, manual or differential-pressure drains, an optional 5 um filter grade, and gauge scales in MPa, psi or bar. With the automatic drain fitted, the regulator adjusts over 0.15-0.9 MPa (20-130 psi). Flow is published as curves rather than a single rated figure, so we confirm the datasheet numbers for your application on request.
| Model | GC600C25AF2K AirTAC F.R.L. Combination, PT 1 in |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to impact wrenches and pneumatic nutrunners on a vehicle trim line, with the automatic drain clearing condensate from the 1 in supply main between shifts.
Supplying conditioned air to the cylinder-driven stops, diverters and pushers on a bottling hall conveyor, the 40 um element keeping pipe scale and rust out of the line valves.
Powering pneumatic clamps and tool-change cylinders on a machining centre, the regulator holding the set clamping pressure and the lubricator misting the air-tool circuits downstream of the check valve.
Choose the size step first: 200, 300, 400 or 600, each stepping up in port and flow capacity, with this unit at size 600 on a 1 in PT port. Drain type is a real decision: automatic (this unit) empties the bowl without attention, manual is the lowest-cost choice, and differential-pressure drains on a trigger; regulation range is 0.15-0.9 MPa (20-130 psi) with automatic or differential-pressure drain and 0.05-0.9 MPa (7-130 psi) with manual. Filtration is 40 um standard or 5 um with code W where finer protection is needed. The embedded square gauge is standard with MPa, psi or bar scales, and an external round gauge is optional. Thread is PT as standard; G and NPT are catalogue options to order. The bracket is included (code J deletes it), and code K adds the reverse/check valve that holds downstream pressure. Flow for the GC series is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Send us your line pressure and air demand and we will confirm the datasheet flow figures for GC600 at 1 in before you order.
Code A on this unit is the automatic drain, which expels collected condensate without manual attention. The GC series is also available with manual or differential-pressure drains; note the regulation range differs by drain type: 0.15-0.9 MPa (20-130 psi) with automatic or differential-pressure drain, and 0.05-0.9 MPa (7-130 psi) with manual drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.