The AirTAC GC600C25AF2W AirTAC F.R.L. Combination Unit, 1 in. PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25AF2W is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package. This unit is built in the 600 size with a 1 in. PT port, carries a 5 um filter element, drains condensate automatically, and is fitted with a square pressure gauge reading in psi. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15-0.9 MPa (20-130 psi), and the operating temperature range is -5 to 70 C (non-freezing). At the 600 size the filter and lubricator bowls are aluminium alloy.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600, with port options, manual or automatic drains, 40 um or 5 um filtration, gauge scale choices and thread variants (PT standard, G and NPT to order). Flow figures are published as curves rather than a single rating, so we confirm datasheet numbers on request - just ask before ordering.
| Model | GC600C25AF2W AirTAC F.R.L. Combination Unit, 1 in. PT |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding a weld-cell's air drops on an automotive assembly line: the filter removes water and 5 um particulate, the regulator holds a steady set pressure, and the lubricator carries oil mist to the guns and actuators.
Supplying a workshop pneumatic press where cylinders and valves need clean, regulated and lubricated air - the automatic drain keeps condensate off the shop floor without daily bowl checks.
Conditioning the air feeding conveyor diverters and packaging-machine cylinders, where the 5 um element protects directional valves and the lubricator extends seal and cylinder life.
Start with the port and size step: 600 is the largest GC frame, with this unit carrying a 1 in. PT port, so match it against the air demand of the circuit - flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering. Choose the drain type: automatic drain (fitted here) empties the bowl without operator attention, while manual and differential-pressure drains are the alternatives. Choose the filter grade: 40 um is standard and 5 um (code W, fitted here) suits finer protection downstream. Gauge scale (MPa, psi or bar - psi here) and thread (PT standard, G or NPT to order) are the remaining decodable choices.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number. Tell us your application and required flow and we will confirm the sizing against the datasheet curves on request before you order.
This unit carries code A - an automatic drain that removes collected condensate without operator attention, useful on lines that run unattended. Manual and differential-pressure drains are the catalogue alternatives if you prefer operator-controlled or pressure-differential draining.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.