The AirTAC GC600C25AF2WG AirTAC F.R.L. Combination Unit G1 (1 in) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25AF2WG is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set. This size-600 configuration is built for G1 (1 in) ports with G thread, carries a 5 um filter element (the tighter of the two catalogue grades), an automatic drain on the filter bowl, a standard regulator covering 0.15-0.9 MPa (20-130 psi), and a fitted square gauge scaled in psi. The bowls on this size are aluminium alloy, the maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and a mounting bracket is included.
This is a genuine AirTAC part. The GC line spans sizes 200, 300, 400 and 600, with port options, drain types, filter grades, gauge styles and scales selectable per code. Flow figures for this series are published as curves rather than a single rating, so ask us to confirm the sizing and datasheet numbers for your application before ordering.
| Model | GC600C25AF2WG AirTAC F.R.L. Combination Unit G1 (1 in) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns and air-assisted applicators on a paint line, where the 5 um element, regulated pressure and oil-mist lubrication support consistent finish work at the booth.
Supplying the cylinders and actuators that drive case erectors, tapers and pushers on a packaging conveyor, with clean, regulated and lubricated air at the line drop.
Running the clamps, vises and workholding fixtures on CNC machining centres, where the combination unit conditions the plant air feeding the fixture circuit.
Step up through the GC sizes (200, 300, 400, 600) to match the port and the flow your line needs; this unit sits at the top of the range on G1 (1 in) with G thread (PT is the standard thread, with G and NPT available as order options). Choose the drain type on the filter bowl: automatic (fitted here), manual, or the differential-pressure default. Pick the filter grade: 40 um standard or 5 um with the W code, fitted here. Select the gauge style and scale (embedded square gauge standard, external round gauge optional, in MPa, psi or bar; this code carries a square psi gauge). A mounting bracket is included on this configuration. Because flow for this series is published as curves rather than a single rated figure, send us your application details and we will confirm the sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and sizing from the datasheet before you order.
Both are decodable from the code: the A position selects the automatic drain on the filter bowl (instead of the differential-pressure default or a manual drain), and the W position selects the 5 um filter grade instead of the 40 um standard. If you would rather drain by hand or filter less finely, ask us for the equivalent code in the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.