The AirTAC GC600C25ALC2W AirTAC F.R.L. Combination 1 in PT Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25ALC2W is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one supply package. This 600-size unit carries a PT1 (1 inch) port, a 5 um filter element (the finer of the two published grades), an automatic drain on the filter bowl, and a low-pressure-type regulator. The filter bowl at size 600 is aluminium alloy. A gauge is fitted in this configuration: the external round gauge with a psi scale, in place of the standard embedded square gauge. A mounting bracket is included.
This is a genuine AirTAC part. The GC series is published in sizes 200, 300, 400 and 600 with matching port sizes, a choice of differential-pressure, automatic or manual draining, 40 um standard or 5 um (W) filter elements, gauge scales in MPa, psi or bar, and PT as the standard thread with G and NPT available as order options. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC600C25ALC2W AirTAC F.R.L. Combination 1 in PT Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding impact wrenches, nut runners and air ratchets on a vehicle assembly line, where the filter strips water and fine particulate, the regulator holds a set working pressure and the lubricator carries an oil mist to the tools.
Supplying the cylinders and air actuators on carton forming, case sealing and palletising lines, keeping moisture and debris out of the valve stack while holding a stable, low set pressure to the downstream circuit.
Conditioning the air at a moulding machine's supply drop, where the automatic-drain filter handles condensate from long distribution runs and the lubricator protects the machine's pneumatic valves and cylinders.
Step through the decodable choices in order. First, size and port: the 600 size is the largest in the GC range and pairs with the 1 inch PT port here; match the size step to the air demand of the circuit, and ask us to confirm the flow curve against your application before ordering. Second, drain type: this unit has an automatic drain, which discharges collected water without manual attention; manual and differential-pressure draining are the other published choices. Third, filter grade: this configuration carries the 5 um (W) element instead of the 40 um standard. Fourth, gauge: the round external gauge with psi scale is fitted here; square embedded gauges and MPa or bar scales are the alternatives. Thread is PT as standard, with G and NPT as order options, and the mounting bracket is included. Note that this is the low-pressure regulator type; its exact adjustment range is not published in the sheet we work from, so we confirm it on request.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a rated flow, Cv or SCFM figure. Tell us your working pressure and air demand and we will confirm the sizing against the datasheet flow curves on request before you order.
The L in GC600C25ALC2W marks the low-pressure-type regulator rather than the standard version. It is intended for circuits that run at lower set pressures. The exact adjustment range for the low-pressure type is not published in the sheet we work from, so we confirm it on request. Everything else decodes normally: automatic drain, 5 um filter element, round psi gauge, PT1 port, aluminium alloy filter bowl and included bracket, with a maximum inlet pressure of 1.0 MPa (145 psi) and an operating temperature of -5 to 70 C, non-freezing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.