The AirTAC GC600C25ALF2 AirTAC F.R.L. Combination 1 in. PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25ALF2 is a three-piece AirTAC GC series F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply unit. This size 600 configuration carries a 1 in. PT port, an automatic drain on the filter bowl, the standard 40 um filter element, the low-pressure regulator variant and an embedded square gauge reading in psi. At size 600 the filter bowl is aluminium alloy.
This is a genuine AirTAC part. The GC series is offered in sizes 200, 300, 400 and 600 with port sizes from 1/8 in. to 1 in., and with choices of drain type, 5 um or 40 um filtration, gauge scale, G or NPT thread and a reverse/check valve. Flow for this unit is published as curves rather than a single rating, so ask us to confirm the sizing figures against your application before ordering.
| Model | GC600C25ALF2 AirTAC F.R.L. Combination 1 in. PT |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Point-of-use conditioning for impact wrenches, air ratchets and nut runners on a vehicle assembly line: the filter removes water and particulate, the regulator holds tool pressure and the lubricator mists oil into the tool air.
Supplying filtered, regulated and lubricated air to the cylinders and air-driven grippers that index bottles and cartons along a packaging conveyor, with the automatic drain clearing condensate without a shutdown.
Conditioning the shop-air feed to a CNC cell's pneumatic clamps, chip-clearing jets and tool-change cylinders, where a 1 in. main supply feeds several devices through one treated line.
The real choices in this series are decodable from the code: size 200/300/400/600 sets the port and the flow band, so step up a size when your demand sits near the top of a curve; drain type is differential-pressure (default), automatic (this unit) or manual; filter grade is 40 um standard or 5 um with code W; the gauge is an embedded square unit with MPa, psi or bar scales, and an external round gauge is optional; thread is PT as standard with G and NPT as order options; a bracket is included. Flow is published as curves, not a single rated figure, so send us your application details and we will confirm sizing before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your working pressure and the demand of the equipment downstream, and we will confirm the sizing from the datasheet on request.
This unit carries the L (low-pressure) regulator variant instead of the standard one. The exact adjustment range for the low-pressure type is not published in our datasheet extract, so we confirm it on request; for reference, standard-type GC units with automatic drain adjust over 0.15-0.9 MPa (20-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.