The AirTAC GC600C25ALF2W AirTAC F.R.L. Combination Unit, PT1 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25ALF2W is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one supplied-air package. This size 600 unit is fitted with a PT1 (1 in) PT thread, an automatic drain on the filter bowl, a 5 um filter element (the W grade, against the 40 um standard), and the low-pressure type regulator with an embedded square gauge scaled in psi. No reverse/check valve is fitted, and the mounting bracket is included. At size 600 the bowls are aluminium alloy. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC family is offered in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and with choices of drain type, filter grade, gauge style and scale, and G (BSPP) or NPT threads as order options where PT is the standard. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application before ordering.
| Model | GC600C25ALF2W AirTAC F.R.L. Combination Unit, PT1 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
A filtered, regulated and lubricated air package feeding spray guns and air-actuated equipment on a paint line, where the 5 um element and automatic drain keep water and particulate out of the finish and the low-pressure regulator holds the circuit at its working setting.
Installed ahead of pneumatic cylinders, diverters and grippers on a filling or packaging conveyor, giving the line one point where the air is cleaned, regulated and lubricated; the automatic drain suits continuous multi-shift running.
Supplying air tools, clamps and blow-off points at a machining centre: the lubricator delivers an oil mist to air tools, the 5 um filtration protects valves and cylinders, and the 1 in port serves the high draw of a full cell.
Choose the size and port step (200/300/400/600, 1/8 in to 1 in) against the air demand of the circuit; this unit is the size 600, PT1 (1 in) entry. Drain type is a real choice: automatic (fitted here) empties the filter bowl without operator attention, while manual and differential-pressure drains are the catalogue alternatives. Filter grade is 40 um standard or 5 um with the W code; this unit carries the 5 um element. The regulator here is the low-pressure type. The embedded square gauge is standard and the external round gauge is optional, with MPa, psi or bar scales (psi fitted here). Thread is PT as the standard, with G (BSPP) and NPT as order options, and a mounting bracket is included. Flow is published as curves, not a single rating, so have us confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
Flow for the GC series is published as curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your application and we will confirm the datasheet flow figures and check the sizing of this unit for you on request.
The A in the code fits the automatic drain, which expels collected condensate from the filter bowl without operator attention. Manual and differential-pressure drains are the other catalogue options for the filter bowl, so specify the drain type you want when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.