The AirTAC GC600C25C2WG AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25C2WG is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one complete air-preparation set. This configuration is the size 600 unit with a 1 in port in G (BSPP) thread, 5 um filtration (the finer of the two catalogue grades), a differential-pressure drain on the filter bowl, and a standard regulator with an externally mounted round gauge reading in psi. The regulator adjusts from 0.15 to 0.9 MPa (20 to 130 psi), maximum working pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). At size 600 the filter bowl is aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC combination is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, a choice of PT, G or NPT thread, 40 um standard or 5 um (W) filtration, differential-pressure, automatic or manual draining, and gauge style and scale options. Flow figures for this series are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC600C25C2WG AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeds cleaned, regulated and lubricated air to the clamping fixtures, tool changers and actuator circuits of a CNC machining centre, protecting spindles and valves from water and scale while keeping cylinder seals lubricated.
Conditions the air at a paint-line drop so that water and fine particulate are stripped out before atomizing equipment, the regulator holds a steady set pressure for consistent spray work, and the lubricator serves downstream air tools.
Supplies treated air to the pneumatic stoppers, pushers and lift gates along a bottling or packaging conveyor, where the 5 um element guards the directional valves and the lubricator extends cylinder service life.
Start with the size and port: the 600 frame with its 1 in connection suits the largest air consumers in the G-series range, but the right step depends on the flow your circuit actually draws, so match the published flow curve to your demand rather than port size alone. The differential-pressure drain on this unit flushes the filter bowl automatically as pressure across the element builds; if your application needs scheduled manual draining or fully automatic draining instead, those are catalogue options. This unit carries the 5 um (W) element - choose it where finer particulate removal matters, or specify the 40 um standard grade where it does not. The round gauge on this configuration reads in psi; square embedded gauges and MPa or bar scales are alternatives. PT is the standard thread, with G and NPT available as order options, and a mounting bracket is included with this unit.
Because flow data is published as curves and not as a single rated figure, we cannot quote one number here - send us your application details and we will confirm the sizing and full datasheet on request before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a flow number here. Send us your application details and we will confirm the flow curve and full datasheet on request so you can size the unit against your actual air demand before ordering.
The W in the code GC600C25C2WG specifies the 5 um filtration grade, which is the finer of the two catalogue options (40 um is the standard element). Choose 5 um where downstream equipment such as precision valves, spray equipment or instrumentation needs finer particulate removal; the 40 um grade remains available on other GC configurations if coarser filtration is sufficient.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.