The AirTAC GC600C25F2 AirTAC F.R.L. Combination, PT 1 in Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25F2 is an AirTAC GC series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one complete air-preparation set. This size 600 configuration is built for a 1 in PT port, filters to 40 um with a differential-pressure drain, regulates between 0.15-0.9 MPa (20-130 psi) with a fitted square psi gauge, and adds oil-mist lubrication downstream. At size 600 the filter and regulator bowls are aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC line spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and options include a 5 um filter grade (code W), automatic or manual drains, gauge scales in MPa, psi or bar, and G (BSPP) or NPT threads in place of the PT standard. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC600C25F2 AirTAC F.R.L. Combination, PT 1 in Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
A full F.R.L. set at the 1 in main drop feeding a vehicle assembly cell: water and particulate stripped to 40 um, line pressure held steady at the set point, and oil mist carried to impact wrenches and pneumatic nutrunners along the line.
Conditioned air for the cylinder bank that drives pushers, diverters and clamp gates on a carton packaging conveyor. The lubricator keeps seal friction down on high-cycle actuators while the regulator protects them from supply surges.
A single preparation point for a workshop press and its clamping fixtures: clean, pressure-regulated and lubricated air from the shop 1 in ring main, with the square psi gauge giving the operator a direct read of set pressure at the cell.
Start with the port and size step: this unit is size 600 with a 1 in PT port, the largest step in the GC range (200/300/400/600), so match it to lines plumbed at 1 in and to the flow your system needs - we can confirm the flow curve against your demand before you order. Choose the drain type: this configuration uses the differential-pressure drain (automatic A and manual M are the other catalogue options). Filter grade is 40 um standard here; specify W for 5 um where finer particulate removal is required. The fitted square gauge reads in psi; MPa and bar scales are available, and an external round gauge is optional. Thread is PT as standard, with G (BSPP) and NPT as order options, and a mounting bracket is included with this set.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for this series as performance curves rather than a single rated figure, so we do not quote one number. Send us your operating pressure and air demand and we will confirm the flow from the datasheet for this exact configuration on request.
The differential-pressure drain is the default on the GC filter: it bleeds condensate automatically when the pressure differential across the filter rises, with no operator attention. If you prefer a set-and-forget automatic drain, order the A code; for a hand-operated drain, order M. All three are catalogue options on this family.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.