The AirTAC GC600C25F2K AirTAC F.R.L. Combination 1 in. PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25F2K is an AirTAC GC three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioning set. This configuration is built for 1 in. PT ports, with a 40 um filter element and a differential-pressure drain on the filter bowl, a standard regulator fitted with an embedded square gauge scaled in psi, and a reverse/check valve fitted downstream of the regulator. The filter bowl on this size 600 unit is aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in. to 1 in., with drain, filter grade, gauge scale, thread and reverse-valve options to match the line. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC600C25F2K AirTAC F.R.L. Combination 1 in. PT |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Conditioning the 1 in. main feeding a metal stamping press cell: the filter removes water and scale from the shop-air main, the regulator holds a steady setting for the press controls, and the lubricator mists oil to the air-driven actuators on the die clamps.
Supplying treated air to a row of pneumatic torque tools and clamps on an automotive assembly line, where the combination keeps the line pressure stable, traps line moisture before it reaches the tools, and carries lubricant mist downstream to extend tool life.
Mounted at the inlet of a mobile or industrial machine's pneumatic control panel, giving the machine one point where incoming compressed air is filtered, set to the control circuit's pressure, and lubricated before it splits to the valve stack and cylinders.
Start with the port and size step: this unit is size 600 with a 1 in. PT port, the largest step in the GC range, so match it to the main air line feeding the work cell. Choose the drain type where it applies: differential-pressure (this unit) drains as pressure drop builds, automatic drains without operator input, and manual drain suits supervised installations. Filter grade is 40 um standard on this unit; specify the W code for 5 um where finer particulate removal is needed. The regulator adjustment range is 0.15-0.9 MPa (20-130 psi) with this differential-pressure drain, and the fitted square gauge reads in psi; MPa and bar scales and an external round gauge are order options. Thread is PT as standard, with G (BSPP) and NPT as order options, and the mounting bracket is included.
Flow for this family is published as curves, not a single rated number, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Tell us your working pressure and required flow and we will confirm the sizing against the datasheet on request before you order.
The F2 code in GC600C25F2K specifies the embedded square gauge with a psi scale, which is standard on this configuration. MPa and bar scales, and an external round gauge, are available as order options - just tell us which scale you want when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.