The AirTAC GC600C25F2WGK AirTAC F.R.L. Combination, G1 (1 in) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25F2WGK is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator set up as one air-preparation station. This configuration is sized at 600 with a G1 (1 in) port, carries a 5 um filter element (code W), a differential-pressure drain, an embedded square gauge reading in psi, a fitted reverse/check valve (code K) and an included mounting bracket. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), the maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). At size 600 the bowls are aluminium alloy.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options include 40 um or 5 um filtration, differential-pressure, automatic or manual drains, gauge scales in MPa, psi or bar, and PT, G or NPT threads. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GC600C25F2WGK AirTAC F.R.L. Combination, G1 (1 in) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding a machining centre's clamps, tool-change cylinders and blow-off circuits from a 1 in main, with the 5 um element protecting directional valves and the regulator holding a steady working pressure.
Supplying impact wrenches, nutrunners and air cylinders along an assembly line; the lubricator meters oil mist to the tools while the filter removes water and particulate from the shop air.
Running actuators, grippers and stopper cylinders on a packaging conveyor, where the combination keeps supply air filtered, regulated and lubricated from one wall-mounted station.
The real choices in this series are all decodable from the code. Step through sizes 200/300/400/600 and ports 1/8 in to 1 in to match the pipe and the duty of your line. Choose the drain: differential-pressure (as fitted here), automatic, or manual. Choose the filter grade: 40 um standard or 5 um (W) as on this unit. Pick the gauge scale (MPa, psi or bar) and, if you prefer, an external round gauge instead of the embedded square one. Thread is PT as the standard, with G (BSPP) and NPT as order options; a mounting bracket is included on this unit. Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line's flow demand and working pressure and we will confirm the sizing from the datasheet on request.
The W in the code GC600C25F2WGK selects the optional 5 um element instead of the 40 um standard grade. Choose 5 um where downstream valves, cylinders or instruments need finer particulate removal. Drainage on this unit is the differential-pressure type, the default drain option for the family.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.