The AirTAC GC600C25F2WK AirTAC F.R.L. 3-Unit, PT1 (1 in), 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25F2WK is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one supply package. This size 600 configuration is built around a PT1 (1 in) PT-threaded port, so it sits on a 1 in compressed-air main and feeds downstream cylinders, valves and air tools with cleaned, regulated and lubricated air. The filter carries the fine 5 um element (code W) with a differential-pressure drain, the standard-type regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), and the set includes the embedded square gauge scaled in psi, a reverse/check valve and a mounting bracket. Maximum working (inlet) pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), and at size 600 the filter and lubricator bowls are aluminium alloy.
This is a genuine AirTAC part. The GC series spans sizes 200, 300, 400 and 600 with ports from 1/8 in up to 1 in, and each size can be ordered with a 40 um or 5 um element, a differential-pressure, automatic or manual drain, an MPa, psi or bar gauge scale, and G (BSPP) or NPT threads in place of the PT standard. Flow for this unit is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC600C25F2WK AirTAC F.R.L. 3-Unit, PT1 (1 in), 5 um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
A 1 in main feeding impact wrenches and air ratchets at assembly stations: the 5 um element keeps water and swarf out of the tools, the regulator holds the working pressure, and the lubricator mists oil into the tool air.
Filler, capper and seamer actuators on a packaging line draw from one supply point; this combination cleans, regulates and lubricates the air feeding those cylinders and valves from a 1 in header.
On a workshop ring main serving CNC clamps, chucks and air tools, the fitted check valve helps hold downstream pressure and the 5 um grade suits precision work, with the psi gauge matching US gauges.
Step through sizes 200, 300, 400 and 600 to match the port and the duty your line needs - this unit is the 600 size on a 1 in PT port, the largest step in the series. Choose the drain: differential-pressure (as fitted here), automatic for unattended condensate removal, or manual where you drain by hand. Pick the filter grade: 40 um standard or the finer 5 um (this unit carries the 5 um W element). Select the gauge scale - MPa, psi or bar - and the thread: PT is the standard, with G (BSPP) and NPT available as order options. Flow is published as curves, not a single rating, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote one number. Send us your line pressure, port size and downstream demand and we will confirm the flow from the datasheet on request before you order.
The W code in this model selects the fine 5 um element instead of the 40 um standard, for cleaner air feeding precision valves and tools. The drain on this unit is differential-pressure; automatic and manual drains are available in the same size if you prefer.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.