The AirTAC GC600C25LC2G AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC600C25LC2G is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply unit. This configuration is the size 600 frame with a G1 (1 in) port and G (BSPP) thread, a 40 um standard filter element, a differential-pressure drain on the filter bowl, and a low-pressure type regulator. The bowls on the size 600 filter and lubricator are aluminium alloy, and the regulator is fitted with an external round gauge reading in psi. The maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). A mounting bracket is included; no reverse/check valve is fitted.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600, with a choice of ports and threads (PT as the standard, G and NPT as order options), manual or automatic drains, a 5 um filter element (code W), gauge style and scale, and standard or low-pressure regulation. Because flow is published as curves rather than a single rating, we confirm the datasheet and sizing figures for your application on request.
| Model | GC600C25LC2G AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to impact wrenches, nut runners and clamping fixtures along a vehicle assembly line, where a single 1 in supply point serves a bank of air tools.
Conditioning the air feeding conveyor diverters, filling-head cylinders and case-packing actuators on a bottling line, keeping water and particulate out while carrying oil mist to the cylinders.
Supplying workholding clamps and tool-change cylinders on a CNC machining centre, where the low-pressure regulator holds a gentle, stable clamping pressure and the lubricator protects the cylinders.
Start with the size and port: the 600 frame is the largest in the GC range, and the G1 (1 in) port suits lines with high air demand - match the port step against the consumption of the downstream cylinders and tools rather than guessing. Choose the drain: this unit uses the differential-pressure drain (the default); automatic (A) and manual (M) versions exist if your maintenance routine prefers them. Filter grade is 40 um as standard; specify 5 um (code W) only where finer particulate removal is genuinely needed. The regulator here is the low-pressure type, so confirm your working pressure band suits it before ordering. Gauge options are the embedded square gauge or an external round gauge, with MPa, psi or bar scales - this unit carries a round psi gauge. Thread is G (BSPP) on this code; PT is the standard and NPT can be ordered. A bracket is included.
One honest note on sizing: AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a flow number here. Ask us to confirm the flow and datasheet figures against your application before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a flow number. Tell us your line pressure and the air consumption of the equipment you are feeding, and we will confirm the flow and datasheet figures for this unit on request before you order.
The L in the code GC600C25LC2G marks the low-pressure type regulator, intended for applications whose working pressure sits in the lower band; the exact regulation range for the low-pressure type is not published, so we confirm it on request. The C2 marks the external round gauge fitted to the regulator, reading in psi; the embedded square gauge is the standard option, with MPa, psi or bar scales available.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.