The AirTAC GC600C25LC2K AirTAC F.R.L. Combination 1 in PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC600C25LC2K is a three-piece AirTAC GC F.R.L. combination - a separate air filter, pressure regulator and oil-mist lubricator assembled as one unit - in the largest 600 size with a PT1 (1 in) port. This configuration carries the standard 40 um filter element with a differential-pressure drain, a low-pressure type regulator, a round gauge scaled in psi, a reverse/check valve, and a mounting bracket. The filter bowl on the 600 size is aluminium alloy.
This is a genuine AirTAC part. The GC series is also available in 200, 300 and 400 sizes with smaller ports, a choice of automatic, manual or differential-pressure drains, an optional 5 um filter element (code W), gauge scales in MPa, psi or bar, and G (BSPP) or NPT thread options in place of the PT standard. Flow figures are published as curves rather than a single rating, so we confirm datasheet numbers on request before you order.
| Model | GC600C25LC2K AirTAC F.R.L. Combination 1 in PT |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
A 1 in FRL unit conditioning the supply air on a foundry's tool ring main, removing water and particulate, holding a stable low-pressure setting and feeding oil mist to the air tools on the line.
Point-of-entry air preparation for heavy impact-wrench and torque-tool stations in a commercial-vehicle assembly cell, where a large 1 in feed serves several high-demand tools from one conditioned drop.
Conditioned air for the cylinder-driven stoppers, pushers and transfer conveyors on a bottling line, with the filter protecting valves, the regulator holding the actuation pressure and the lubricator extending cylinder seal life.
Start with the port step: the 600 size takes a 1 in connection, and larger sizes carry more flow - match the size to the air demand of the downstream circuit rather than to the pipe alone. Choose the drain type where it applies: differential-pressure (the default here) drains only when the pressure differential is high enough, automatic drains continuously, and manual requires an operator. Filter grade is 40 um as standard; specify 5 um (code W) where finer particulate removal is needed. Pick the gauge scale - MPa, psi or bar - and the thread: PT is the standard, with G (BSPP) and NPT as order options. This unit is the low-pressure type (code L) and includes a reverse/check valve and bracket. Because flow is published as curves and not a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so there is no one number we can honestly quote. Send us your application details and we will confirm the flow figures from the datasheet so you can size the unit correctly before ordering.
The L marks the low-pressure type of regulator. It is intended for circuits that run at lower working pressures than the standard version; the exact adjustment range for this type is not published in the standard table, so we confirm it from the datasheet on request. The rest of the code reads as: 600 size, 1 in PT port, differential-pressure drain, 40 um filter, round psi gauge, reverse/check valve, bracket included.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.