The AirTAC GC600C25LF2 AirTAC F.R.L. Combination, PT1 (1 in) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC600C25LF2 is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, assembled as one 600-size unit for 1 in PT (PT thread standard) ports. In this configuration the filter element is the standard 40 um grade, the bowls drain by differential pressure (no manual or automatic drain is fitted), the regulator is the low-pressure (L) type for applications where the working pressure sits below the standard band, and an embedded square gauge with a psi scale is included. At size 600 the bowls are aluminium alloy, and the unit is rated for a maximum inlet pressure of 1.0 MPa (145 psi) with an operating temperature of -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600, with port sizes from 1/8 in to 1 in, a choice of 40 um or 5 um (W) filtration, differential-pressure, automatic or manual drains, MPa, psi or bar gauge scales, and G (BSPP) or NPT threads as order options. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC600C25LF2 AirTAC F.R.L. Combination, PT1 (1 in) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
A 1 in main air feed serving clamps and pneumatic presses in a stamping or forming cell: the GC600C25LF2 filters water and particulate from the header air, holds a stable regulated pressure for the press cycle, and mists oil into the line to keep cylinders and valves lubricated.
High-cycle packaging, case-erecting and palletising machinery fed from a large-diameter air main: the three-unit set cleans the air, regulates it to the level the machine's valves were set up for, and carries lubrication to the actuators running thousands of cycles per shift.
A central F.R.L. station at the point where a 1 in drop leaves the main header to serve an assembly hall: the filter protects every downstream tool from water and debris, the low-pressure regulator suits processes that run below standard line pressure, and the lubricator conditions air tools on the floor.
Start with the port and size: this 600-size unit carries a 1 in PT port, the largest step in the range, so match it to your main air line and expected demand rather than downsizing on price alone. Choose the drain next: this unit uses the differential-pressure drain (the default); automatic (A) and manual (M) drains are available in the family if your installation cannot rely on a pressure differential to clear the bowls. Filtration is the standard 40 um grade here; specify 5 um (code W) if downstream equipment needs finer air. The regulator in this code is the low-pressure (L) type - confirm your setpoint with us, as the exact range for the low-pressure type is not published. The gauge is the embedded square type with a psi scale; MPa or bar scales and an external round gauge are options. Thread is PT as standard, with G (BSPP) and NPT available to order.
One honest note on sizing: AirTAC publishes flow for this family as curves, not as a single rated number, so we do not quote a flow figure here. Send us your application details and we will confirm the right size against the datasheet curves before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so we do not quote a flow number for this unit. Send us your line pressure, port size and the equipment you are feeding, and we will confirm the flow from the datasheet and check the 600 size against your demand before you order.
The L in GC600C25LF2 marks the low-pressure regulator type, intended for applications where the regulated pressure sits below the standard band; the exact range for the low-pressure type is not published, so confirm your setpoint with us. The drain is the differential-pressure type (the default): it discharges collected condensate when the pressure differential across the filter bowl builds up, with no manual intervention. Automatic (A) and manual (M) drains are available in the family if your duty cycle does not suit this.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.