The AirTAC GC600C25LF2W AirTAC F.R.L. Combination, 1 in PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25LF2W is a three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one air-preparation set. This size 600 unit is built for a 1 in PT port and carries a 5 um filter element (the finer of the two published grades) with a differential-pressure drain and an aluminium alloy bowl on the filter section. The regulator is the low-pressure type and is fitted with an embedded square gauge scaled in psi, and the set includes a mounting bracket.
This is a genuine AirTAC part. The GC series spans sizes 200, 300, 400 and 600, with port sizes from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um filtration, gauge scales in MPa, psi or bar, and PT, G or NPT threads. Maximum working pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rating, so ask us to confirm figures from the datasheet for your application.
| Model | GC600C25LF2W AirTAC F.R.L. Combination, 1 in PT |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the cell's air cylinders, clamps and pneumatic valves, with the 5 um element protecting downstream components and the low-pressure regulator holding a reduced setting for the circuit.
Supplies lubricated air to the pneumatic actuators that index, stop and divert bottles along the conveyor, with the square psi gauge giving operators a local pressure readout at the drop.
Delivers oil-mist lubricated air at a controlled low pressure to weaving and spinning machinery, where the separate lubricator keeps actuators and valves running smoothly through long production shifts.
Size and port set the air capacity: the 600 size with a 1 in PT port is the largest step in the GC range, so match it against the flow your line actually needs rather than assuming the biggest size is automatic. The filter element here is 5 um; if your application does not require fine filtration, the standard 40 um element is the other published choice. Drain is differential-pressure, which bleeds the bowl as pressure falls; automatic and manual drains are the alternatives. The gauge is an embedded square type scaled in psi, with MPa or bar scales and an external round gauge available. Thread is PT as standard, with G (BSPP) and NPT as order options, and a mounting bracket is included. Flow is published as curves, not a single rated figure, so send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Send us your operating pressure and expected air demand and we will confirm the flow from the datasheet on request.
The W code in this model selects the 5 um element instead of the 40 um standard, giving finer removal of particulate and water carryover from the filtered air. The differential-pressure drain then expels collected liquid from the aluminium alloy bowl as pressure falls. If your application does not need 5 um filtration, the 40 um element is the standard published option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.