The AirTAC GC600C25MF2WG AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25MF2WG is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. This configuration is built around a G1 (1 in) port with G thread, a 5 um filter element (the finer of the two published grades) with a manual drain, and an aluminium alloy bowl on the filter section, which is the bowl material used at size 600. The regulator is the standard type with a 0.05-0.9 MPa (7-130 psi) adjustment range and an embedded square gauge reading in psi, and the lubricator delivers oil-mist lubrication downstream. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). A mounting bracket is included.
This is a genuine AirTAC part. The GC family is published in sizes 200, 300, 400 and 600, with port options, thread choices (PT standard; G and NPT as order options), drain types, filter grades and gauge scales selectable by code. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC600C25MF2WG AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Point-of-use preparation on a 1 in main feeding the palletizer's large pneumatic cylinders: water and 5 um particulate removed, pressure held in range, and oil mist carried to the actuators.
A packaged-goods conveyor line with air-driven pushers and diverters draws from this FRL set, so the cylinders see clean, regulated, lubricated air at a stable set pressure.
A shop-air drop serving pneumatic clamps and air tools uses this three-unit set to strip water and fine particles, hold the regulator setting, and mist-lubricate the tools downstream.
Step up or down through the GC sizes (200/300/400/600) to match the port and the flow your line needs; this unit is the size 600 set on a G1 (1 in) port, the largest step in the family. The 5 um element (code W) suits air that needs finer particulate removal than the 40 um standard grade, and the manual drain means an operator drains the bowl on a routine rather than automatically. The square gauge is fitted and reads in psi; MPa and bar scales are available by code. Thread is G here, with PT as the standard and G/NPT as catalogue options to order. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for this family as curves, not as a single rated figure, so there is no one number we can quote. Tell us your application and we will confirm the flow figures from the datasheet on request before you order.
M is the drain code: this set has a manual drain, so the filter bowl is drained by hand on a routine (automatic and differential-pressure drains are available by code). W is the filter grade: a 5 um element instead of the 40 um standard grade.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.