The AirTAC GFR200-06 AirTAC Filter Regulator, NPT 1/8 in, Manual Drain is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06 is a compact filter regulator that removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is the 200 size with a 1/8 in NPT port, a manual drain bowl in polycarbonate, a 40 um standard filter element, a standard regulator with a 0.05-0.9 MPa (7-130 psi) adjustment range, and a built-in reverse (check) valve that holds downstream pressure if the upstream supply is lost. No gauge is fitted and no mounting bracket is included.
This is a genuine AirTAC part from the GFR series, which spans the 200, 300, 400 and 600 sizes with port options from 1/8 in to 1 in, manual, automatic or differential-pressure drains, an optional 5 um element, gauge choices and G, NPT or PT threads. We confirm flow and other datasheet figures on request, since flow is published as curves rather than a single rating.
| Model | GFR200-06 AirTAC Filter Regulator, NPT 1/8 in, Manual Drain |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeds filtered, regulated air to a compact bench press or crimping tool, with the check valve holding the set pressure at the cylinder if the shop air line is interrupted mid-cycle.
Conditions the air supply to a small vacuum or gripper module on an assembly cell, keeping water and debris out of the valve island while the regulator pins the working pressure.
Provides clean, manually adjustable air to a bench-top test fixture or instrument panel, where the manual drain suits intermittent use and the check valve prevents backflow into the supply line.
Start with the port and size: the 200 size with a 1/8 in NPT port suits compact circuits and low-to-moderate air demand, while larger GFR sizes carry bigger ports for higher demand. Choose the drain to match access: manual drain (this model) needs someone to open the bowl drain periodically; automatic and differential-pressure drains discharge condensate without attention. The 40 um element is the standard grade; specify the W option for a 5 um element where finer filtration is needed. This unit has no gauge fitted, so add one separately if a visual setpoint is required; gauge scales are available in MPa, psi or bar. NPT is specified here; G (BSPP) and PT are the other catalogue thread options. No mounting bracket is included on this code.
Flow for this series is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as performance curves rather than a single rated figure, so we do not quote a rated flow number. Send us your application details and we will confirm the flow figures from the datasheet on request before you order.
The M in the code GFR20006MJNTK specifies a manual drain, so condensate collected in the polycarbonate bowl is released by opening the drain by hand at intervals; automatic and differential-pressure drain versions are available if you prefer unattended operation. The N specifies that no pressure gauge is fitted, so order a gauge separately if you want a visual indication of the set pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.