The AirTAC GFR200-06 AirTAC Filter Regulator NPT1/8 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200-06 is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and holds downstream pressure in one compact body. This configuration has a 1/8 in NPT port, a 5 um filter element (code W), a differential-pressure drain, a round pressure gauge reading in bar, and no mounting bracket. The polycarbonate bowl shows collected condensate at a glance, and the regulator adjusts between 0.15 and 0.9 MPa (20-130 psi).
This is a genuine AirTAC part in the GFR family, which spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in and PT, G or NPT thread options. Operating limits are 1.0 MPa (145 psi) maximum inlet pressure and -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so ask us to confirm datasheet figures for your application.
| Model | GFR200-06 AirTAC Filter Regulator NPT1/8 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Clean, regulated air at the point of use for clamp cylinders, tool-change actuators and chip-eject cylinders on a small machining center, with the 5 um element protecting fine control valves.
Filtered, pressure-controlled air for carton-sealing and case-packing cylinders on a packaging conveyor, where the differential-pressure drain keeps condensate moving out during production.
Conditioned air for sample-handling actuators and pneumatic grippers on lab automation equipment, where the 5 um grade and a bar-reading gauge support precise, repeatable settings.
Size by port and demand: this unit is size 200 with a 1/8 in NPT port; larger GFR sizes (300/400/600) step up in port and flow capacity. Drain choices are differential-pressure (this unit, the default), automatic (code A) or manual (code M). Filter grade is 40 um as standard; this unit carries the finer 5 um element (code W). Gauge options are the embedded square gauge or an external round gauge with MPa, psi or bar scales; this one is a round gauge in bar. Thread here is NPT; PT is the standard thread and G (BSPP) is also a catalogue option. This configuration has no mounting bracket (code J). Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this family as curves, not a single rated figure, so there is no one number we can quote. Tell us your line pressure and downstream demand and we will confirm the datasheet curve for your conditions on request before you order.
The W in the code GFR20006JC3WT selects the 5 um element; 40 um is the standard grade for general circuit protection. The 5 um grade suits finer downstream components such as precision valves and instruments, in the same housing with the same differential-pressure drain and regulation range.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.