The AirTAC GFR200-06 AirTAC Filter Regulator PT1/8 Low Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06 is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This 200-size unit is fitted with a 1/8 in PT port, the standard 40 um filter element, a differential-pressure drain that bleeds condensate automatically as flow passes through, and a low-pressure regulator type for circuits that run at reduced setpoints. An external round gauge with a psi scale is included so the outlet pressure can be read directly, and a mounting bracket is supplied for panel or frame fixing.
This is a genuine AirTAC part from the GFR series, which is available in 200, 300, 400 and 600 sizes with port sizes from 1/8 in to 1 in, PT as the standard thread and G (BSPP) or NPT as orderable options, a choice of 40 um or 5 um (W) filtration, differential-pressure, automatic or manual drains, and gauge or no-gauge configurations. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR200-06 AirTAC Filter Regulator PT1/8 Low Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Mounted on the fixture manifold of a machining cell, the unit filters shop air and holds a reduced clamping pressure for delicate workpieces, with the psi gauge giving the operator a direct readout at the setpoint.
Feeding bench-top test instruments and pneumatic actuators on a lab rig, the 40 um element strips water and pipe scale while the low-pressure regulator type trims the supply down to the gentle pressure the instruments require.
Installed ahead of the diverter and pusher cylinders on a packaging conveyor, the unit conditions the line air and regulates it to the low setting the diverters need, with the differential-pressure drain handling condensate during continuous running.
Start with the port and size: this unit is 200 size with a 1/8 in PT port, so step up to GFR300/400/600 if your line uses larger ports or expects higher flow. Because this is the low-pressure (L) type, choose it where the working setpoint sits below the standard regulator's normal band; the exact adjustment range for the low-pressure type is not published, so confirm it with us. The differential-pressure drain is the default and suits steady-flow lines; specify automatic (A) for unattended drainage or manual (M) if you want operator-controlled bleeding. The 40 um element is the standard grade; order the W variant for 5 um when downstream equipment needs finer filtration. The included round gauge reads in psi; square embedded gauges and MPa or bar scales are alternatives. PT is the standard thread, with G and NPT available to order, and a bracket is included.
Flow for this series is published as curves, not a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so no single number can be quoted honestly. Tell us your application and required flow and we will confirm the datasheet curve figures for this 200-size, 1/8 in port unit on request before you order.
The C2 suffix in GFR20006LC2 specifies an external round gauge with a psi scale, so the outlet pressure is read directly in psi without conversion. The L suffix specifies the low-pressure regulator type, intended for circuits set below the standard type's normal band; the exact adjustment range for the low-pressure type is not published, so confirm it with us when specifying the setpoint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.