The AirTAC GFR200-06G AirTAC Filter Regulator 1/8 in, 5 um, Manual is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200-06G is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This configuration is the size 200 unit with a G1/8 (BSPP) port, a 5 um filter element (the finer of the two catalogue grades), a manual drain for the PC bowl, a round pressure gauge reading in psi, and a mounting bracket included. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and the unit handles a maximum inlet pressure of 1.0 MPa (145 psi) at temperatures from -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and options include automatic, manual or differential-pressure drains, a 40 um standard or 5 um fine element, square or round gauges with MPa, psi or bar scales, and G or NPT threads in place of the PT standard. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR200-06G AirTAC Filter Regulator 1/8 in, 5 um, Manual |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
On a workholding clamp fed by a short 1/8 in air drop, this unit filters the supply to 5 um and lets the operator set and read the clamping pressure on the psi gauge, with the manual drain emptied during shift checks.
For a laboratory bench running small air-driven tools or apparatus, the fine 5 um element and a locally adjustable regulated pressure keep the supply clean and at the set point the procedure calls for.
At a manual blow-off or air-gun station, the unit strips water and particles from the shop line, the regulator sets a safe working pressure at the gauge, and the manual drain is bled at the end of each shift.
Start with the port step: the size 200 body takes a 1/8 in port, and if your line needs more flow the same function is available in sizes 300, 400 and 600 with larger ports. Because flow is published as curves and not as a single rating, tell us your application and we will confirm sizing against the datasheet before you order. On this unit the drain is manual, which suits installations where the bowl is easy to reach and someone drains it on a routine; if the unit sits where regular access is awkward, an automatic or differential-pressure drain version is worth considering. The 5 um element fitted here is the finer catalogue grade - choose it when downstream equipment is sensitive to finer particles; the 40 um standard grade suits general-purpose supply. The round gauge fitted reads in psi; square embedded gauges and MPa or bar scales are the other catalogue options. The G (BSPP) thread is a catalogue option ordered in place of the PT standard, and the mounting bracket is included.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so there is no one figure we can honestly quote. Send us your application details and we will confirm the sizing against the datasheet before you order.
This unit's code specifies a manual drain: condensate collected in the PC bowl is released by hand. It suits positions that are easy to reach on a routine walk-round. If the unit will be mounted where regular access is difficult, ask about the automatic or differential-pressure drain versions of the same series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.