The AirTAC GFR200-06G AirTAC Filter Regulator G1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200-06G is an AirTAC GFR-series filter regulator: one body that removes water and particulate from compressed air and reduces pressure in a single unit. This 200-size configuration has a G1/8 (1/8 inch) port with G (BSPP) thread, a manual-drain bowl in polycarbonate, a 40 um standard filter element and the low-pressure regulator type. A square pressure gauge scaled in psi is fitted, and the unit is supplied without a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
It is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and is available with manual, automatic or differential-pressure drains, a 5 um element (code W), MPa/psi/bar gauge scales, G or NPT thread options and optional brackets. Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
| Model | GFR200-06G AirTAC Filter Regulator G1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Filtered, reduced-pressure air holds pneumatic clamps and swing stops on machining fixtures, with the low-pressure regulator type keeping holding force gentle and repeatable.
Water and 40 um particulate are stripped out before air reaches the spray gun, and the low-pressure regulator holds the atomising pressure the gun was set up for.
On packaging lines, small air cylinders that fold flaps and press tape run on filtered, regulated air; the manual drain suits a line that is blown down at shift end.
Size and port step up from 200 to 600 as flow demand grows; this unit is the 200 size with a 1/8 inch port, the smallest step in the range. Drain choice matters: manual means you bleed the bowl by hand, while automatic and differential-pressure drains in the same family discharge condensate without attention - choose manual for intermittent or attended duty. The standard element is 40 um; specify 5 um (code W) where downstream equipment needs finer filtration. The fitted square gauge reads in psi, with MPa and bar scales as options and an external round gauge available. Thread: PT is the standard, with G (BSPP) and NPT as catalogue options - this unit is the G version. Brackets are optional and this configuration omits one. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as performance curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and full datasheet figures for this unit on request.
The M in the code means the polycarbonate bowl is drained by hand: you open the drain when condensate collects. It suits intermittent or attended duty; if the unit runs unattended, the same family offers automatic or differential-pressure drains instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.