The AirTAC GFR200-06JF2WG AirTAC Filter Regulator, G1/8, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06JF2WG is a size-200 filter regulator: it removes water and particulate from compressed air and sets a stable downstream pressure in one compact body. This configuration carries a G1/8 (BSPP) port, 5 um filtration element, a differential-pressure drain that bleeds collected condensate automatically as flow passes through, and an embedded square gauge scaled in psi so the set pressure is readable at the unit. The polycarbonate bowl lets you see the condensate level at a glance, and the standard regulator covers a 0.15-0.9 MPa (20-130 psi) adjustment range with a maximum inlet pressure of 1.0 MPa (145 psi).
This is a genuine AirTAC part from the GFR filter-regulator line, available in sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in, thread choices of PT (standard), G or NPT, drain types, 40 um or 5 um filtration, and gauge or no-gauge builds. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures for your application on request.
| Model | GFR200-06JF2WG AirTAC Filter Regulator, G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeding a small vacuum or gripper circuit on a carton-packing machine, where the 1/8 in port, 5 um air and a psi-set regulated supply keep the compact cylinders and ejectors running on clean, stable pressure.
Supplying instrument-grade actuation air to a laboratory analyser or sample transport station, where the 5 um element protects sensitive valves and the square psi gauge documents the set pressure.
Regulating and filtering supply air to clamps and small cylinders on an assembly fixture, with the differential-pressure drain keeping condensate off the tooling without a daily bowl-emptying routine.
Start with the port step: this unit is size 200 with a 1/8 in G-thread port, so match it to lines where the required air demand sits within that connection size - for larger demand, step up through the 300, 400 or 600 sizes. Choose the drain to suit access: this build uses the differential-pressure drain, which needs no daily attention, while automatic and manual drains are available on other codes. The 5 um element here is the finer option over the 40 um standard, suited to downstream components that tolerate less particulate. The fitted square gauge reads in psi; MPa and bar scales and an external round gauge are alternatives. Thread is G (BSPP) here, with PT as the standard and NPT as an order option, and this code omits the mounting bracket.
Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote one number. Tell us your application and we will confirm the flow and sizing data from the datasheet on request before you order.
The differential-pressure drain on this code bleeds collected condensate automatically as air flows through, so it suits installations that are not checked daily. If your line has intermittent flow or you prefer hands-on control, automatic (code A) or manual (code M) drain versions are available in the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.