The AirTAC GFR200-06LJF1T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06LJF1T is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This 200-size unit has a 1/8 in NPT port, the low-pressure regulator type, a 40 um standard filter element and a differential-pressure drain on its polycarbonate bowl. A square pressure gauge with an MPa scale is included, the unit is supplied without a mounting bracket, maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the GFR series, which spans the 200, 300, 400 and 600 sizes with 1/8 in to 1 in ports, a choice of PT, G or NPT threads, manual, automatic or differential-pressure drains, a 5 um (W) filter element option and gauge variations. Rated flow is published as curves rather than a single figure, so we confirm flow and other datasheet values on request before you order.
| Model | GFR200-06LJF1T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeding directional control valves and small air cylinders on an assembly or packaging line where the circuit is designed to run at reduced pressure rather than full header pressure.
Supplying clean, regulated air to pneumatic test rigs and laboratory fixtures, where the 40 um element keeps debris and condensed water out of sensitive instruments.
Conditioning the air feed to spray guns and coating equipment, combining water and particle removal with a set working pressure in one compact body.
The real choices on this family: step through the 200/300/400/600 sizes to match the port and flow your line needs; pick the drain - differential-pressure (as fitted here), automatic (A) or manual (M); choose the 40 um standard element or the finer 5 um W option; and select the gauge scale (MPa, psi or bar) or an external round gauge. Thread is NPT on this unit; PT is the standard and G is also available to order, and a mounting bracket can be added where needed. Flow for the GFR series is published as curves, not a single rating, so send us your application and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and sizing from the datasheet on request.
F is the square gauge option and 1 is the MPa scale, so this unit is supplied with an embedded square pressure gauge reading in MPa. Psi (2) and bar (3) scales are available, and an external round gauge can be ordered.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.