The AirTAC GFR200-06M AirTAC Filter Regulator, PT1/8, Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06M is a filter regulator: it removes water and particulate from compressed air and sets downstream pressure in one compact body. This unit is the 200 size with a PT1/8 port, the low-pressure type regulator, a 40 um filter element, and a manual drain bowl in polycarbonate. It is fitted with a round external gauge reading in psi and a reverse/check valve, and it is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR series is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, in PT, G (BSPP) or NPT thread, with manual, automatic or differential-pressure drains, 40 um or 5 um elements, and gauge options. Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
| Model | GFR200-06M AirTAC Filter Regulator, PT1/8, Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Filtering and holding a set pressure on the clamping air of a machining-centre fixture, where the low-pressure type regulator suits circuits that run well below full line pressure and the check valve holds the setting if supply dips.
Conditioning the compressed air feeding bench-top lab instruments: the 40 um element strips water and particulate at the point of use, and the psi gauge lets technicians read and verify the supply pressure directly.
Supplying cleaned, regulated air to the cylinders and actuators on a packaging line, with the PT1/8 port matching compact machine take-offs and the manual drain allowing the operator to bleed the bowl during shift checks.
Size the unit by stepping up the 200/300/400/600 series against the flow your line needs - larger sizes carry larger ports and more flow, and we will confirm the curve figures before you order. This configuration is already fixed as: PT1/8 port in PT thread (G and NPT are order options), manual drain, 40 um element, low-pressure regulator type, round psi gauge, check valve fitted, no bracket. The manual drain suits installations where an operator can bleed the bowl on a routine; choose automatic or differential-pressure drain codes if no one will attend the unit. If you need finer filtration, the 5 um element is available under the W code in this family.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow figures from the datasheet and check the sizing against your required flow before you order.
The M in the code means the polycarbonate bowl is drained by hand: an operator opens the drain to bleed collected water, which suits attended installations. The L code marks the low-pressure regulator type, intended for circuits set well below full line pressure; its exact adjustment range is not published in our sheet, so we confirm it on request. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.