The AirTAC GFR200-06MJC2WG AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06MJC2WG combines water and particulate filtration with pressure regulation in a single body. This configuration is a 200-size unit with a G1/8 (BSPP) port, a manual drain, a 5 um filter element, and a round pressure gauge reading in psi. The manual drain means the bowl is emptied by hand, which suits installations that are shut down regularly or checked as part of routine maintenance. Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing); the polycarbonate bowl should not be used where the air could freeze.
This is a genuine AirTAC part. The GFR family is available in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, a choice of drain types, 40 um or 5 um filtration, embedded square or external round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm datasheet figures against your application before ordering.
| Model | GFR200-06MJC2WG AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
A workholding clamp circuit on a bench press needs air cleaned of water and swarf and held at a set pressure so clamping force stays repeatable. This unit filters and regulates in one body, and the psi gauge lets the operator set and check the clamp pressure directly.
Bench-top test rigs and instrument panels use small-bore air lines where dirt causes sticking and erratic readings. The 5 um element and 1/8 in port on this unit match that duty, with the manual drain suiting equipment that is powered down and serviced between test runs.
Vacuum and gripper circuits on packaging machines need clean, regulated air at the manifold. This unit conditions the supply at the machine inlet, and the compact 200-size body fits the tight space alongside the machine's own valve island.
Choose the size by the port and flow your line needs: this 200-size unit carries a 1/8 in port, the smallest step in the range, so step up to 300, 400 or 600 for larger ports and higher flow. The 5 um element (code W) suits air feeding precision valves, instruments or sensitive actuators; the 40 um standard element is the usual choice for general plant air. The round psi gauge is fitted with this code; an embedded square gauge and MPa or bar scales are the alternatives. Thread here is G (BSPP); PT is the standard thread and NPT is an order option. No mounting bracket is included with this code (J). Regulation range for this manual-drain unit is 0.05-0.9 MPa (7-130 psi).
Flow for this family is published as curves, not a single rated figure, so send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as curves rather than a single rated figure, so we do not quote a rated flow number. Send us your line pressure, downstream air demand and acceptable pressure drop, and we will confirm the sizing from the datasheet on request.
This code carries M for a manual drain: the bowl is emptied by hand, which suits attended or regularly shut-down installations. If the unit will be mounted where manual attention is not practical, choose an automatic (A) or differential-pressure drain code instead. Manual-drain units also carry the wider 0.05-0.9 MPa (7-130 psi) regulation range.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.