The AirTAC GFR200-06T AirTAC Filter Regulator NPT1/8 with Bar Gauge is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06T is a compact filter regulator that removes water and particulate from compressed air and sets downstream pressure in a single body. This 200-size unit has a 1/8 in NPT port, a 40 um standard filter element, and a differential-pressure drain that bleeds collected condensate automatically whenever the pressure differential across the element is high enough. The fitted embedded square gauge reads in bar, and the standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). The polycarbonate bowl keeps the air path visible, and a mounting bracket is included.
This is a genuine AirTAC part. The GFR family is offered in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, a choice of 40 um or 5 um (W) filtration, differential-pressure, automatic or manual drains, square or round gauges with MPa, psi or bar scales, G (BSPP) or NPT thread options, and a low-pressure regulator type where needed. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GFR200-06T AirTAC Filter Regulator NPT1/8 with Bar Gauge |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeding a small bench-mounted pneumatic press or clamp cylinder: the 40 um element keeps scale and pipe debris out of the valve and cylinder seals, while the regulator holds a steady set pressure so cycle force stays repeatable from one shift to the next.
Conditioning the supply to pick-and-place and sealing actuators on a packaging line: water and particulate are stripped out before they reach the directional valves, and the bar-scale square gauge gives operators a visible set point to check during changeover.
Supplying filtered, regulated air to panel-mounted pneumatic control components and small actuators: the compact 200 size and 1/8 in port fit tight cabinet routing, and the differential-pressure drain keeps condensate moving out without operator intervention.
Start with the port and size step: the 200 size with a 1/8 in NPT port suits compact supply lines, while 300, 400 and 600 sizes carry progressively larger ports for higher-demand circuits - match the step to the flow your line actually needs. Then set the options that this code fixes: the 40 um element is the standard grade for general plant air (choose the W code for 5 um where finer protection matters), and the differential-pressure drain handles condensate automatically without a manual dump - pick automatic or manual drain codes if your duty cycle demands it. The square gauge here reads in bar; MPa and psi scales and an external round gauge are available. PT is the standard thread, with G (BSPP) and NPT as order options, and a bracket is included for panel or wall fixing. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes G-series flow as curves across the pressure range rather than a single rated figure, so quoting one number would be misleading. Tell us your line pressure and the flow your circuit needs and we will confirm the sizing from the datasheet on request before you order.
The F3 code in GFR200-06T selects the embedded square gauge with a bar scale (MPa and psi scales are available as alternatives), and the trailing T selects NPT threads instead of the PT standard - G (BSPP) is also a catalogue option. If you need a different gauge scale or thread, ask us for the matching code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.