The AirTAC GFR200-06T AirTAC Low-Pressure Filter Regulator 1/8 NPT is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06T is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady in one compact body. This low-pressure type unit is configured with a 1/8 in NPT port, a manual-drain polycarbonate bowl, a 5 um filter element (code W), a round MPa pressure gauge, and no mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the GFR series, which spans sizes 200 to 600 with ports from 1/8 to 1 in and thread options PT, G and NPT. Drain type, filter grade, gauge and bracket vary by code. Because flow is published as curves rather than a single rating, we confirm the datasheet and sizing figures on request.
| Model | GFR200-06T AirTAC Low-Pressure Filter Regulator 1/8 NPT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Filtered, low-pressure regulated air to pneumatic clamps on an assembly fixture, where a manual-drain bowl suits a manned cell and the 5 um element conditions the air feeding the clamp valves.
Supplying filtered, regulated air to small cylinders and diverters on a packaging conveyor, with the round MPa gauge giving operators a visible setpoint at the machine.
A point-of-use filter regulator ahead of spray guns in a finishing booth, where the low-pressure type and 5 um element suit coating work and the manual drain is bled between shifts.
Choose the GFR size and port against the air consumption of the machine on the line - larger sizes move more air - and confirm the match with us before ordering, since flow is published as curves rather than one rated figure. This code is the low-pressure type, intended for circuits that hold lower setting pressures; its exact adjustment range is not published, so check it against your setpoint with us first. The manual drain needs periodic bleeding by an operator, so pick an automatic or differential-pressure drain code where nobody is stationed at the machine. The 5 um element (W) is the finer of the two published grades; the standard is 40 um. Gauges are offered with MPa, psi or bar scales, thread is PT as standard with G and NPT as order options, and brackets are optional.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Send us your application's air consumption and line pressure and we will confirm the correct size and the datasheet flow curve on request.
This unit has a manual drain: an operator opens it periodically to expel collected water. If the installation is unmanned or hard to reach, order an automatic (code A) or differential-pressure (blank) drain version instead. This code also carries the 5 um element (W); the standard published grade is 40 um.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.