The AirTAC GFR200-06T AirTAC Low-Pressure Filter Regulator NPT 1/8 is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200-06T is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is built on the size-200 frame with a 1/8 in NPT port, a 5 um filter element (code W), and a manual-drain polycarbonate bowl. It is the low-pressure type, intended for circuits that run below standard regulator settings; its exact adjustment range is not published, and we confirm it from the datasheet on request. A round pressure gauge with a bar scale is fitted, and no mounting bracket or reverse/check valve is included in this version.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and can be ordered with differential-pressure, automatic or manual drains, 40 um standard or 5 um elements, embedded square or external round gauges in MPa, psi or bar scales, and PT (standard), G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application before ordering.
| Model | GFR200-06T AirTAC Low-Pressure Filter Regulator NPT 1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
On assembly-line clamping fixtures that hold workpieces at reduced pressure, the GFR200-06T filters the supply to 5 um and regulates the clamp circuit at low pressure, with the fitted bar-scale gauge giving operators a local pressure reading.
In a spray booth, paint guns need clean air at a low, steady setting; this unit strips water and 5 um particulate from the gun supply and regulates it at low pressure, with the manual-drain bowl emptied as part of shift-end housekeeping.
Bench-top pneumatic instruments in a lab benefit from a 5 um element and stable low-pressure regulation; the manual-drain bowl suits a supervised environment where draining the bowl is part of routine equipment checks.
The real, decodable choices on this family: step through sizes 200/300/400/600 and ports 1/8 in to 1 in as your flow demand grows; pick the drain - differential-pressure (default), automatic, or manual as on this unit - to match how often the bowl will be serviced; choose the 40 um standard element or the 5 um W option for finer protection; select gauge type and scale (MPa, psi or bar); and order PT (standard), G or NPT threads, with or without a bracket. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and full datasheet figures for this exact configuration on request.
This unit is code M - manual drain - so accumulated water is released by opening the drain during servicing. Automatic and differential-pressure drain versions are available in the same family if you prefer the bowl to discharge without operator action.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.