The AirTAC GFR20006C2WT AirTAC Filter Regulator NPT1/8, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR20006C2WT is an AirTAC GFR200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This configuration is the size-200 unit with a 1/8 in NPT port, 5 um filtration (the finer W grade), a differential-pressure drain that bleeds collected condensate automatically whenever the pressure differential is high enough, and a round pressure gauge reading in psi. The standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi), with a maximum inlet pressure of 1.0 MPa (145 psi), and the polycarbonate bowl suits operating temperatures of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with a choice of ports, PT (standard), G or NPT threads, differential-pressure, automatic or manual drains, 40 um or 5 um filtration, gauge styles and scales, and bracket options. Flow figures are published as curves rather than a single rating, so ask us and we will confirm the datasheet numbers for your application on request.
| Model | GFR20006C2WT AirTAC Filter Regulator NPT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeding clean, regulated air to the tool-change clamps and pneumatic actuators on a machining centre, where the 5 um grade helps protect close-tolerance valve seats from particulate carryover.
Supplying regulated air to conveyor divert gates and bag-seal cylinders on a packaging line, with the differential-pressure drain keeping condensate down through continuous shift running.
Regulating air to test-rig clamps and sample-handling cylinders in a lab or QC bench setup, where the psi gauge gives a direct local reading for repeatable fixture pressure.
Start with the port step: the GFR200 carries a 1/8 in port, and stepping up to GFR300/400/600 raises both the port size and the flow capacity, so size the unit against the air demand of the circuit rather than the fitting alone. Choose the drain to match the duty: differential-pressure (as fitted here) drains automatically under load, automatic drains continuously, and manual drains suit low-moisture or periodically attended installations. The 5 um W grade fitted here is the finer option over the 40 um standard, and the round psi gauge can be swapped for a square gauge or an MPa or bar scale. PT is the standard thread; G and NPT are order options, and a mounting bracket is included on this unit. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Send us your application details and we will confirm the datasheet flow figures for this 1/8 in, size-200 unit on request before you order.
The W in the code specifies the finer 5 um filtration grade instead of the 40 um standard, which suits downstream equipment that is sensitive to fine particulate. The drain code is blank, meaning the differential-pressure type: condensate is expelled automatically when the differential across the drain is high enough, with no manual draining required under normal duty.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.