The AirTAC GFR20006JC3TK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006JC3TK is a filter regulator: one body that removes water and particulate from compressed air and holds downstream pressure steady. This configuration has a 1/8 in NPT port, the standard 40 um filter element, a differential-pressure drain, and an external round gauge reading in bar. A reverse (check) valve is fitted, the regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range, and the unit is supplied without a mounting bracket. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the GFR200 series, the smallest of four sizes (200/300/400/600) that step up through 1/4 in to 1 in ports. Across the GFR range you can order manual or automatic drain instead of the differential-pressure drain, a 5 um element (code W), MPa, psi or bar gauge scales, and PT, G or NPT threads. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet numbers for your application.
| Model | GFR20006JC3TK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Conditioning and regulating the air feeding solenoid valves and clamping cylinders on a CNC machining centre, with the 40 um element catching pipe scale and the regulator holding a steady working pressure between 0.15 and 0.9 MPa.
Clean, regulated air for the diverters, grippers and stop cylinders on a bottling or cartoning conveyor line, with the fitted check valve guarding against backflow in the supply leg.
Setting a consistent clamping pressure at a pneumatic workholding fixture or small bench press, where the operator reads the round bar gauge and adjusts within the 0.15-0.9 MPa range.
Size and port: the 200 size with a 1/8 in port suits light-duty circuits; step up to 300, 400 or 600 as your port size and air demand grow. Drain: this unit uses the differential-pressure drain; automatic (A) and manual (M) versions are orderable if your installation prefers them. Filter grade: 40 um is standard here; specify code W for the 5 um element where finer filtration is needed. Gauge: this configuration carries an external round gauge reading in bar; the embedded square gauge with MPa, psi or bar scales is the alternative. Thread: this unit is NPT; PT is the G-series standard and G (BSPP) is also a catalogue option. Bracket: code J means no bracket is supplied.
One honest note before you order: AirTAC publishes flow for this series as curves, not a single rating, so we do not quote a flow number here. Ask us to confirm sizing against your application using the datasheet curves.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the datasheet flow curve and help you size the unit before you order.
GFR20006JC3TK has a 1/8 in NPT port (code T). PT is the standard thread for the G series, and G (BSPP) is also a catalogue option - order the matching thread suffix for your piping. Thread choice is a specification decision, not a delivery matter.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.