The AirTAC GFR20006JF2K AirTAC Filter Regulator PT1/8 40 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200 is a compact filter regulator: it removes water and particulate from compressed air and holds a set downstream pressure in one body. This configuration, GFR20006JF2K, is the size 200 unit with a PT1/8 (1/8 in) port, the standard 40 um filter element, a differential-pressure drain, and a standard regulator adjustable from 0.15-0.9 MPa (20-130 psi). It carries an embedded square gauge scaled in psi, a reverse/check valve is fitted, and no mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The bowl on this size is polycarbonate (PC).
This is a genuine AirTAC part. The GFR200 is the smallest size in the GFR range, which steps through 200, 300, 400 and 600 with increasing port sizes and flow capacity. Order options include the 5 um (code W) element, automatic or manual drain, G (BSPP) or NPT threads, gauge scales in MPa, psi or bar, an external round gauge, and a mounting bracket. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR20006JF2K AirTAC Filter Regulator PT1/8 40 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feed the machine tool's pneumatic valves, tool-clamp circuit and coolant-sparge lines through this unit: the 40 um element catches pipe scale and condensate before the machine's valves, and the regulator holds a steady setpoint with the psi gauge visible on the panel.
Install one unit at the drop feeding the cartoner's small cylinders and grippers. The PT1/8 port matches compact FRL drops, the check valve helps hold the setting through brief supply dips, and operators can verify the setpoint at a glance on the square psi gauge.
Mount this filter regulator at each gun drop in a finishing booth to set stable atomizing pressure per gun. The 40 um element keeps water and debris out of the finish, and the differential-pressure drain handles the condensate that collects at the drop.
Start with the port and size step: the 200 size with its PT1/8 port suits the low end of the GFR flow range, so step up to 300, 400 or 600 if your line needs more air; we can check the flow curves against your demand before you order. Choose the drain to match the installation: differential-pressure (this model), automatic for unattended drops, or manual where an operator drains on a schedule. Pick the element grade: 40 um standard for general plant air, 5 um (code W) where downstream valves or instruments need finer filtration. The square gauge ships scaled in psi here; MPa and bar scales and an external round gauge are options. Thread is PT as standard, with G (BSPP) and NPT available to order; a bracket option exists if you need panel fixing. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR200 as curves, not as a single rated number, so we do not quote one figure out of context. Tell us your application, working pressure and air demand, and we will confirm the flow curves and datasheet figures for this exact model on request before you order.
This model's differential-pressure drain is the default option: it expels collected condensate based on the pressure differential across the filter element, with no operator intervention in normal running. If your installation suits a scheduled drain or an unattended automatic drain, the manual (M) and automatic (A) drain versions are available to order in the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.