The AirTAC GFR20006LC2GK AirTAC Filter Regulator G1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006LC2GK is a GFR-series filter regulator: one body that removes water and particulate from compressed air and holds downstream pressure. This 200-size unit has a G1/8 (BSPP) port, the low-pressure regulator type (code L), a 40 um standard filter element and a differential-pressure drain that discharges collected condensate as air flows through. A round gauge scaled in psi is fitted, a reverse/check valve (code K) is built in, a mounting bracket is included, and the polycarbonate bowl is rated for a maximum inlet pressure of 1.0 MPa (145 psi) at -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans four sizes - 200, 300, 400 and 600 - with ports from 1/8 in up to 1 in, optional 5 um filtration (code W), automatic or manual drain choices, square or round gauges scaled in MPa, psi or bar, and G or NPT thread options. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet details for your application before ordering.
| Model | GFR20006LC2GK AirTAC Filter Regulator G1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Spray guns in a finishing booth need clean, dry air held at a gentle, steady setting. This low-pressure filter regulator cleans the supply, drains condensate and holds the setpoint on the gun drop, with the psi gauge giving the operator a direct read.
Bench-top and pilot-scale rigs running small air cylinders at modest pressures suit this 1/8 in low-pressure unit: 40 um filtration protects the hardware, the built-in check valve blocks reverse flow, and the included bracket fixes the unit to the frame.
Compact pneumatic actuators on form-fill-seal or labelling machines draw little air but still need a clean supply and a stable, low setpoint. This GFR200 unit filters and regulates at the machine drop, and the round psi gauge lets a technician verify the setting at a glance.
Size the unit by port and expected demand: this 200-size body takes a G1/8 port, the smallest step in the range, while the 300, 400 and 600 sizes open up larger ports for higher demand. Because AirTAC publishes flow as curves rather than one rated number, send us your pressure and flow requirements and we will confirm the right size from the datasheet. Other decodable choices on GFR units: drain type (differential-pressure as here, automatic with code A, or manual with code M), filter grade (40 um standard, 5 um with W), gauge style and scale (the fitted round gauge here reads psi), thread (G as here or NPT, with PT as the standard), and bracket (included here). The L in this code marks the low-pressure regulator type; its exact adjustment range is not published, so confirm your setpoint with us if it sits near the top of a standard range.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR performance as flow curves rather than a single rated figure, so no flow number is quoted here. Send us your supply pressure, setpoint and air demand and we will confirm the flow for this 200-size, G1/8 unit from the datasheet before you order.
This code carries C2, so a round external gauge scaled in psi is fitted. Across the GFR family the embedded square gauge is standard and the external round gauge is optional, with MPa, psi or bar scales to choose from - pick the scale that matches the gauges already on your line.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.