The AirTAC GFR20006LJC2T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR20006LJC2T is an AirTAC GFR200 filter regulator: one body that removes water and particulate from compressed air and regulates downstream pressure. This 200-size unit is fitted with a 1/8 in NPT port, the standard 40 um filter element, and a differential-pressure drain that bleeds collected condensate automatically whenever the pressure differential across the bowl is high enough, so no manual draining routine is needed. It is the low-pressure (L) type, intended for circuits that run below standard regulator settings, and it carries an external round pressure gauge scaled in psi so operators can read and set the downstream pressure directly. The polycarbonate bowl suits the -5 to 70 C (non-freezing) operating range, and maximum working (inlet) pressure is 1.0 MPa (145 psi).
This is a genuine AirTAC part. The GFR family is available in 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drains, a 5 um (W) filter grade option, embedded square or external round gauges in MPa, psi or bar scales, and PT (standard), G or NPT threads to order. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GFR20006LJC2T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeding cleaned, regulated low-pressure air to the gripper and cylinder circuit of a carton pick-and-place station, where the differential-pressure drain keeps condensate off the valves without operator attention.
Supplying filtered, regulated air to positioner and pilot-air circuits on a process valve skid, with the psi-scaled round gauge letting technicians set and verify the low downstream pressure at the panel.
Conditioning the air feed to hand tools and small clamping fixtures at an assembly workstation, where the 40 um element protects downstream components and the compact 200 size fits tight bench mounting.
Start with the port step: this unit is 200 size with a 1/8 in NPT port, so check it against the line size and the flow your circuit needs - larger 300/400/600 sizes carry bigger ports and more flow. The drain here is differential-pressure (the default), which suits installations where the unit sees regular pressure changes; choose automatic (A) for unattended drains or manual (M) where you want to drain on demand. The 40 um element is the standard grade; specify the W option if the application needs 5 um filtration. The round gauge on this code is scaled in psi; square embedded gauges and MPa or bar scales are alternatives. Thread is NPT on this code (PT is the catalogue standard, G and NPT are options), and this J-coded unit comes without a mounting bracket - order a bracketed variant if you want panel or wall fixing. Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a l/min or SCFM number on the page. Send us your application details and we will confirm the flow data from the datasheet and check the sizing against your line before you order.
The C2 in the code specifies an external round gauge scaled in psi. Embedded square gauges are the standard fitting, and gauges are available in MPa, psi or bar scales, so you can order a variant with the scale and style your panel needs. This code is also the low-pressure (L) type; its exact regulation range is not published in the material we hold, so confirm it with us if your setpoint is critical.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.