The AirTAC GFR20006LJC2WG AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR20006LJC2WG is an AirTAC GFR200 filter regulator: water and particulate filtration plus downstream pressure regulation combined in a single body. This unit is the 200 size with a G1/8 (1/8 in) G-thread port, the low-pressure regulator type, a 5 um filter element (40 um is the standard alternative), and a differential-pressure drain that uses the pressure drop across the element to discharge condensate. A round external gauge scaled in psi is fitted, the polycarbonate bowl suits the 200 size, and no mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, differential-pressure, automatic or manual drains, 40 um or 5 um elements, embedded square or external round gauges scaled in MPa, psi or bar, and optional brackets. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR20006LJC2WG AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Filtered, regulated air at a reduced set pressure keeps spray guns fed with clean, dry air, while the 5 um element limits the particulate that would otherwise mar the finish.
A compact G1/8 filter regulator at each machine drop protects small pneumatic actuators and valves from water and fine dust, with the low-pressure type matching circuits that run below standard set pressures.
Clean, regulated air to the wrapper's sealing and clamping cylinders keeps the line running, with the fitted psi gauge letting operators check the set point at a glance.
Choose the size by port and flow: the 200 size with G1/8 suits compact supply drops, while 300, 400 and 600 step up in port and capacity. Drain options are differential-pressure (this unit), automatic or manual. Filter grade is 40 um standard or 5 um (this unit, code W) for finer particulate removal. Gauges are an embedded square gauge as standard or an external round gauge like the one fitted here, scaled in MPa, psi or bar. Thread is PT as the standard with G and NPT as catalogue options; brackets are optional and this configuration is supplied without one. Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR performance as flow curves rather than a single rated figure, so no flow number is quoted here. Send us your line pressure, port size and expected air demand, and we will confirm the sizing from the datasheet on request.
Code W selects the 5 um element for finer particulate removal where downstream equipment is sensitive to contamination; the 40 um element is the standard grade. Both are catalogue options on the GFR family, so choose according to the application.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.