The AirTAC GFR20006LJC2WT AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006LJC2WT is a GFR-series filter regulator: water-and-particulate filtration and pressure regulation combined in a single body. This size-200 configuration carries a 1/8 in NPT port, a 5 um filter element (code W), a differential-pressure drain, and the low-pressure regulator type. An external round gauge reading in psi is fitted, and the unit is ordered without a mounting bracket (code J). The bowl is polycarbonate (PC), the maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in and PT, G or NPT threads, with differential-pressure, automatic or manual drains, 40 um or 5 um elements, gauge and scale choices, and bracket options. Flow is published as curves rather than a single rating, so ask us to confirm sizing and any datasheet figure for your application before ordering.
| Model | GFR20006LJC2WT AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Point-of-use conditioning on a laboratory air bench: the 5 um element cleans the supply feeding bench-mounted actuators and small test rigs, while the low-pressure regulator type and local psi gauge let the operator set and read a gentle working pressure at the bench.
Feeding gripper actuators on a compact pick-and-place cell, where the 1/8 in NPT port suits small manifolds and tight panel space, the 5 um element protects the gripper valves from water and particles, and the round psi gauge gives a local set-point check.
Conditioning the air drop to spray guns in a finishing booth: the 5 um element removes water and particles that would spoil the finish, and the low-pressure regulator type suits the low set-points that spray work calls for, read directly off the fitted psi gauge.
In this code, 200 sets the size and 06 sets the 1/8 in NPT port; step up through sizes 300, 400 and 600 when the application needs a larger port and more flow. The W code selects the 5 um element instead of the 40 um standard, and the blank drain position is the differential-pressure type, with automatic (A) and manual (M) available in the family. The C2 code fits the round gauge with a psi scale; MPa and bar scales are alternatives, and the embedded square gauge is the standard fitting. Thread is NPT here, one of the catalogue options alongside PT (standard) and G. This unit is ordered without a mounting bracket (J); brackets are optional. Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and the correct size from the datasheet on request.
The GFR family is offered with a 40 um standard element or a finer 5 um element selected by the W code. This unit carries the W code, so it filters to 5 um - the choice where downstream equipment is sensitive to smaller particles. The drain is the differential-pressure type (blank drain code), with automatic and manual drains available as options in the family.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.