The AirTAC GFR20006LJF2 AirTAC Filter Regulator PT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006LJF2 is a GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one compact body. This 200-size unit carries a 1/8 in PT port, a 40 um standard filter element and a differential-pressure drain, so accumulated condensate is handled without manual intervention. The regulator is the low-pressure (L) type, a square pressure gauge reading in psi is included, the bowl is polycarbonate (PC) within the -5 to 70 C non-freezing operating range, and the unit is supplied without a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi).
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, and can be ordered with automatic or manual drains, a 5 um (W) element, G or NPT threads, alternative gauge scales and a mounting bracket. Because AirTAC publishes flow only as curves rather than a single rated figure, we confirm flow and datasheet figures for your application on request.
| Model | GFR20006LJF2 AirTAC Filter Regulator PT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeds cleaned, low-pressure regulated air to labeling and print-and-apply heads on a packaging conveyor, where stable reduced pressure keeps adhesive application consistent and the 40 um element protects the small pilot orifices.
Supplies filtered, reduced-pressure air to spray nozzles and atomizing stations in a coating or finishing line, where the low-pressure regulator type matches circuits that run below standard line pressure and the drain keeps moisture out of the finish.
Prepares air for pilot-operated control valves and small actuators in a bottling plant's low-pressure circuit, with the square psi gauge giving operators a direct local reading of the reduced pressure feeding the panel.
Choose the size by port and flow: this unit is 200 size with a 1/8 in PT port, the smallest step in the GFR range, while 300/400/600 sizes carry 1/4 to 1 in ports for larger circuits. The decodable choices on this model are: low-pressure (L) regulator type, 40 um standard element (5 um available as W), differential-pressure drain (automatic A and manual M are orderable), square gauge reading psi (MPa or bar scales and an external round gauge are options), PT thread (G and NPT are catalogue options) and no bracket (omit J to include one). Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR-series flow as curves rather than a single rated figure, so no rated flow number is quoted here. Send us your application details and we will confirm the flow and full datasheet figures for this 200-size, 1/8 in PT unit on request before you order.
It marks the low-pressure regulator type. This variant is intended for circuits that run below standard line pressures. The exact adjustment range for the low-pressure type is not published in the catalogue, so we confirm it on request; the standard-range figures apply only to non-L GFR units.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.