The AirTAC GFR20006MJC1TK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MJC1TK is a size-200 filter regulator: it removes water and particulate from compressed air and holds a stable downstream pressure in one compact body. This configuration has a 1/8 in NPT port, a manual drain bowl in polycarbonate, a 40 um standard filter element, a round pressure gauge with MPa scale, and a built-in reverse/check valve that holds downstream pressure when the upstream supply is lost. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and maximum inlet pressure is 1.0 MPa (145 psi). Operating temperature is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR filter-regulator family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of manual, automatic or differential-pressure drain, a 5 um element option (code W), square or round gauges with MPa, psi or bar scales, and G (BSPP), NPT or PT threads. Flow figures are published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR20006MJC1TK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
On a carton-sealing or wrapping machine, this unit cleans the supply air of water and particles and holds a steady regulated pressure to the cylinders that drive the sealing heads, with the check valve holding the setting if the plant supply dips.
At a machining centre, the GFR20006MJC1TK feeds a clamping circuit: filtered, dry air at a fixed regulated pressure keeps workholding force consistent part after part, and the manual drain lets the operator bleed accumulated water at shift start.
On a small suction-cup pick-and-place station mounted beside a conveyor, this unit supplies clean, regulated air to the vacuum generator and ejector cylinders, with the 1/8 in port matching the compact tubing of the station.
Choose the size and port step against the air your application actually consumes: the GFR200 with its 1/8 in port suits compact circuits and point-of-use drops, while sizes 300, 400 and 600 step up in port and flow capacity. Decide the drain type for the bowl: manual drain (this unit, code M) means someone opens the drain periodically, which suits accessible mounting; automatic or differential-pressure drain suits unattended installations. The 40 um element is the standard grade; specify the W option for 5 um when finer filtration is needed. This unit carries a round gauge with MPa scale; square gauges and psi or bar scales are orderable, and a no-gauge version exists for the family. Thread is NPT here; G (BSPP) and PT are catalogue options. Note the J code means no mounting bracket is supplied - order a bracket separately if you want panel or wall fixing. Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes filter-regulator performance as flow curves rather than a single rated flow number, so there is no one l/min or SCFM figure we can honestly quote. Send us your application details and we will confirm the relevant datasheet figures on request before you order.
The M code in GFR20006MJC1TK means the polycarbonate bowl has a manual drain: someone opens it periodically to remove collected water. The GFR family also offers automatic drain (code A) and differential-pressure drain (blank) for installations you do not want to attend; those are separate orderable configurations.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.