The AirTAC GFR20006MJC2 AirTAC Filter Regulator PT1/8 Manual Drain is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MJC2 is a GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This 200-size unit is configured with a 1/8 inch PT port, a manual drain bowl in polycarbonate, a standard 40 um filter element, and a round pressure gauge reading in psi. The manual drain means an operator opens the bowl drain to expel collected condensate, which suits installations that are checked as part of a routine walk-round. The regulation range is 0.05-0.9 MPa (7-130 psi), and maximum inlet pressure is 1.0 MPa (145 psi).
This is a genuine AirTAC part. The GFR filter-regulator family is available in sizes 200, 300, 400 and 600 with a step of port sizes, and can be ordered with automatic, manual or differential-pressure drains, a 5 um element (code W), square or round gauges with MPa, psi or bar scales, and G or NPT threads as options. Because AirTAC publishes flow for this family as curves rather than a single rated figure, we confirm the datasheet and flow figures for your application on request.
| Model | GFR20006MJC2 AirTAC Filter Regulator PT1/8 Manual Drain |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Fitted at the air inlet of a machine control cabinet, this filter regulator cleans the supply and holds a stable set pressure for the directional valves and cylinders inside, with the psi gauge giving the technician a visible setpoint.
On a packaging or cartoning line, this unit conditions the air feeding small pick-and-place and clamp actuators, with the manual drain emptied during line cleaning rounds and the 40 um element protecting the valve seats.
Installed on a bench or drop line in a maintenance workshop, it filters the shop air and lets the operator dial in the pressure for air tools and small clamping fixtures, reading the setting directly off the round psi gauge.
Start with the port and size: this unit is the 200 frame with a 1/8 inch PT port, the smallest step in the GFR range, so check that your line flow sits within the 200-size curve before ordering - ask us to confirm sizing against the datasheet. On drain, this code carries a manual bowl drain; choose automatic if the unit is installed where nobody regularly walks past, or differential-pressure (the family default) if you want draining tied to the pressure drop across the element. The 40 um element fitted here is the standard grade; specify 5 um (code W) if downstream components need finer filtration. The round psi gauge on this code is the external option - the embedded square gauge is the standard fitting, and MPa or bar scales can be ordered instead. Thread is PT as standard; G (BSPP) and NPT are catalogue options, and the J code means this unit is supplied without a mounting bracket.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR filter-regulator family as curves, not as a single rated figure, so we do not quote a rated flow number for this unit. Tell us your line pressure and required flow and we will confirm against the datasheet whether the 200-size frame with the 1/8 inch port suits your application before you order.
The M in the code GFR20006MJC2 specifies a manual drain: an operator opens the bowl drain to release collected condensate, which suits positions checked on a regular maintenance round. The same GFR200 frame can be ordered with an automatic drain or with the family-default differential-pressure drain if unattended draining is preferred.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.