The AirTAC GFR20006MJC2G AirTAC Filter Regulator G1/8, Manual Drain is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MJC2G is a GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This configuration is the size 200 unit with a G1/8 (BSPP) port, a manual drain bowl you open by hand to expel collected condensate, a 40 um standard filter element, and a round pressure gauge reading in psi. Maximum inlet pressure is 1.0 MPa (145 psi), the standard regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and the operating temperature range is -5 to 70 C (non-freezing). The bowl on this size is polycarbonate (PC).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, plus options including automatic or differential-pressure drains, a 5 um element (code W), square or round gauges with MPa, psi or bar scales, a reverse/check valve, and G or NPT threads. We confirm flow and other datasheet figures on request, since flow is published as curves rather than a single rating.
| Model | GFR20006MJC2G AirTAC Filter Regulator G1/8, Manual Drain |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeding clean, regulated air to a machining centre's pneumatic tool clamps and chip-clearing jets, with the psi gauge letting an operator verify set pressure at a glance and the manual drain cleared during routine shift checks.
Conditioning the air feeding conveyor-mounted diverters and packaging cylinders, where the filter-regulator in one body saves panel space and the manual drain is emptied as part of the line's daily changeover routine.
Installed at a bench drop in a maintenance workshop to filter and regulate air going to impact wrenches, air ratchets and blow guns, with the 40 um element catching pipe-scale and the psi gauge set for hand-tool pressure.
Use this unit when one device must both clean the air and hold a set pressure, and the required port is G1/8. Choose the size step (200/300/400/600) against the flow your line needs - because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering. This unit has a manual drain, which suits installations someone already visits regularly; pick an automatic or differential-pressure drain variant if the bowl cannot be drained by hand. The 40 um element is the standard grade; specify the W variant for 5 um filtration. The fitted round gauge reads in psi; embedded square gauges and MPa or bar scales are alternatives. G (BSPP) is this unit's thread; PT is the standard and NPT is also an order option. A mounting bracket is not included with this code (J) but is available on bracket variants.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a l/min, SCFM or Cv number. Tell us your application and we will confirm the flow and sizing data from the datasheet on request before you order.
The manual drain means you open the bowl drain by hand to release collected condensate - there is no automatic mechanism. Choose it where the unit is visited regularly as part of normal maintenance. If the installation is unattended or hard to reach, ask about the automatic or differential-pressure drain variants of the same GFR200 unit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.