The AirTAC GFR20006MJC2TK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR20006MJC2TK is an AirTAC GFR-series filter regulator: water and particulate filtration plus downstream pressure regulation in a single body. This 200-size unit is threaded 1/8 in NPT, carries the standard 40 um filter element, and uses a manual drain, so condensate is emptied by hand rather than automatically. It is fitted with an external round gauge reading in psi, a reverse/check valve, and is supplied without a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the regulator setpoint covers 0.05-0.9 MPa (7-130 psi). Operating temperature is -5 to 70 C (non-freezing), and the polycarbonate bowl keeps the condensate level visible.
This is a genuine AirTAC part from the GFR200 series, one of four sizes (200/300/400/600) spanning the range of ports from 1/8 in to 1 in. Across the series you can order alternative drains (differential-pressure, automatic or manual), a 5 um fine element (code W), square or round gauges with MPa, psi or bar scales, G(BSPP) or NPT threads in place of the PT standard, and a mounting bracket. Flow figures for this family are published as curves rather than a single rating, so ask us and we will confirm the datasheet numbers for your application before you order.
| Model | GFR20006MJC2TK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Point-of-use conditioning for a machine's control-air branch: the 40 um element strips water and pipe scale before the directional valves, and the regulator holds a steady setpoint to the pilot circuit, with the psi gauge giving a visible line pressure.
Feeding cylinders and grippers on a packaging or cartoning line, where the single-body filter regulator conditions the air and the check valve holds the downstream circuit if the upstream supply dips during a stoppage.
Conditioning the supply to a laboratory or workshop test bench: the manual drain suits an attended rig that is drained between sessions, and the psi round gauge lets the operator set and verify test pressure directly.
Start with the port and size: this 200-size unit is the 1/8 in entry point of the GFR range, and the larger sizes (300/400/600) step up in both port and flow capacity, so size upward if your demand is near the top of what a 200 body can pass. Because flow is published as curves rather than a single rated figure, send us your flow and pressure requirements and we will confirm the right size against the datasheet before you order. On this code the drain is manual, which suits intermittent or attended installations; if the unit will run unattended, consider the automatic or differential-pressure drain versions instead. The 40 um element is the standard grade for general plant air; the 5 um W-code element is available where finer filtration is wanted. The fitted round gauge reads in psi; square gauges and MPa or bar scales are the other options. Thread is NPT here - PT is the AirTAC standard and G(BSPP) is also an orderable option. A mounting bracket can be added on the bracket-included versions; this J-code unit omits it.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your flow demand and working pressure and we will confirm the datasheet curve for this 200-size, 1/8 in unit and advise whether it is correctly sized, or whether a 300 or 400 body suits better.
The M in the code specifies a manual drain: condensate collected in the polycarbonate bowl is released by hand. It is the right choice where the unit is checked regularly or runs intermittently. If the installation runs unattended for long periods, the automatic (A) or differential-pressure (blank) drain versions of the same GFR200 unit empty the bowl without operator action.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.