The AirTAC GFR20006MJC2W AirTAC Filter Regulator PT1/8 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MJC2W is a size-200 filter regulator: it removes water and particulate from compressed air and holds a steady downstream pressure in one compact body. This configuration carries a PT1/8 (1/8 in) port, a fine 5 um filter element (the W grade, tighter than the 40 um standard), a manual drain on the PC bowl, a round pressure gauge reading in psi, and no mounting bracket or reverse/check valve. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and the unit is rated for a maximum inlet pressure of 1.0 MPa (145 psi) at -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and options for drain type (differential-pressure, automatic or manual), filter grade (40 um standard, 5 um), gauge style and scale, thread (PT standard, G and NPT to order) and bracket. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR20006MJC2W AirTAC Filter Regulator PT1/8 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Conditioning the air feeding a small CNC machine's tool-clamp or air-blast circuit: the 5 um element keeps fine particles out of the clamping valve, and the regulator holds a steady set pressure for repeatable clamping.
Supplying cleaned, regulated air to the pneumatic cylinders of a carton tuck-and-seal station, where the manual drain suits a shift-based maintenance routine and the psi gauge lets operators verify set pressure at a glance.
Feeding a bench-top leak or pressure-decay test rig, where the fine 5 um grade protects sensitive test instrumentation and the compact size-200 body with 1/8 in port fits tight panel space.
Start with the port step: size 200 with a PT1/8 port suits the smallest branch lines; step up to sizes 300, 400 or 600 where the line and flow demand it. Choose the drain to match duty: manual (as here) needs periodic bleeding by an operator, automatic drains continuously, and the differential-pressure default drains on a pressure drop. Pick the 5 um element (code W) when downstream valves or instruments need finer filtration than the 40 um standard. Gauge style and scale are decodable too: this unit has a round psi gauge, while an embedded square gauge with MPa, psi or bar scales is also available. Thread is PT as standard with G (BSPP) and NPT as orderable options, and a bracket can be added if the J (no bracket) code does not suit your mounting. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a rated flow, Cv or l/min figure for this unit. Tell us your line pressure, set pressure and expected air demand, and we will confirm the flow curve and sizing from the datasheet on request before you order.
The M in the code GFR20006MJC2W specifies a manual drain: collected water must be bled from the PC bowl by an operator at intervals. The automatic-drain option (code A) removes condensate continuously without attention, and the default differential-pressure drain discharges on a pressure drop. Manual drain suits installations that are checked as part of a regular maintenance routine; choose automatic where the unit runs unattended.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.